Technical support engineer Vacatures

Over de vacature

Word jij het technische aanspreekpunt van onze klanten?

Lees alle informatie over deze vacature zorgvuldig en gebruik vervolgens de sollicitatieknop hieronder om uw cv en sollicitatie te versturen.

Maykin zoekt een technical support engineer (36u p/w) met een afgeronde Hbo-opleiding die graag zijn/haar expertise en klantvriendelijkheid inzet om haar klanten ondersteuning te bieden als eerste technisch aanspreekpunt.

Over Maykin

Maykin is een gerenommeerd IT-bedrijf in Amsterdam. Wij leveren maatwerk en open source software oplossingen voor een breed scala aan klanten, variërend van start-ups tot de Rijksoverheid. Je komt terecht in een niet al te groot, maar gerenommeerd IT-bedrijf waar technologie en passie hand in hand gaan. Wij ontwikkelen voornamelijk complexe webapplicaties en ondersteunen klanten in diverse sectoren. Bij ons geniet je van een down-to-earth werkomgeving met een hecht team van technologiejunkies. Fiets 's ochtends door de bruisende binnenstad naar een werkdag vol technologische uitdagingen, inspiratie én een kop goede koffie!

Wat ga je doen bij Maykin?

Als Technical Support Engineer bij Maykin ben je de expert die klantproblemen analyseert en oplost. Je duikt in gemelde issues, analyseert en reproduceert problemen, en verzamelt gedetailleerde informatie over de oorzaken. Je lost problemen zelf op of schakelt intern met collega's. Met elke uitdaging bouw je kennis op van onze lopende projecten en word je steeds zelfstandiger in het oplossen van technische vraagstukken.

Wat verwachten wij van jou?

Om als technical support engineer bij Maykin aan de slag te kunnen, verwachten wij het volgende:

Je beschikt over een afgeronde Hbo-opleiding;
je beheerst de Engelse en Nederlandse taal uitstekend;
je hebt minimaal 2 jaar ervaring in een vergelijkbare IT-functie;
je bent klantvriendelijk, communicatief vaardig, kan de-escaleren en bent gemotiveerd om klantproblemen op te lossen;
je houdt van technische uitdagingen;
je hebt ervaring met ITIL-processen;
je beschikt over kennis van en ervaring met Linux, DNS-configuraties, Nginx, PostgreSQL, Redis, Python, Continuous Integration (Jenkins);
kennis van en ervaring met monitoring, provisioning en security is een pré;
je wilt terugkerende problemen structureel oplossen en je signaleert en rapporteert mogelijke (technische) verbeteringen binnen onze producten;
je bent 36,25 uur per week beschikbaar.

Inwerktraject

Om onze klanten te kunnen helpen, moet je onze softwareapplicaties goed leren kennen. Je zult daarom in de eerste maand intensief worden ingewerkt in de diverse functionaliteiten van de softwareapplicaties. Vervolgens leer je in de hierop volgende zes maanden zelfstandig door.

Wat heeft Maykin jou te bieden?

Een hecht team met korte lijntjes
Kansen voor zelfontplooiing
Marktconform salaris
24 vakantiedagen
Pensioenregeling
Mogelijkheid tot een vast contract

Interesse?

Ben jij de enthousiaste en gedreven Technical Support Engineer die wij zoeken? Solliciteer dan direct! xvlobhg Stuur je motivatie en cv naar

Join Maykin en groei met ons mee in een inspirerende IT-omgeving!

Soort dienstverband: Fulltime

Salaris: €3.500,00 - €4.250,00 per maand

Arbeidsvoorwaarden:
Bedrijfsfeesten
Bedrijfsopleiding
Budget voor professionele ontwikkeling
Kerstpakket
Pensioen

Taal:
Nederlands (Vereist)

Werklocatie: Fysiek

Over de vacature

Overview

In this role you support internationale klanten die met geavanceerde ERP-omgevingen werken. Je bent het eerste technische aanspreekpunt, lost problemen op en begeleidt migraties samen met teams in Eindhoven en Los Angeles. Je bewaakt systeemefficiëntie en beheert databases op afstand, met klanttevredenheid als centraal doel. Je werkt aan ERP-installaties, upgrades en proactieve optimalisatie in een internationale omgeving.

Arbeidsvoorwaarden / Benefits

• stimulerende werkomgeving
• internationale samenwerking
• ruimte voor persoonlijke en professionele groei
• extern reizen voor trainingen of klantbezoeken
• open teamcultuur
• Brainport Industries Campus locatie

Verantwoordelijkheden

• Eerstelijn technisch aanspreekpunt voor klanten met ERP-omgevingen en proactieve probleemoplossing
• Begeleiden van ERP-installaties en migraties en optimaliseren van systeemprestaties
• Remote databasebeheer en performance tuning van klantdatabases
• Samenwerking met internationale teams en afstemming van processen voor hoge servicekwaliteit
• Documentatie en rapportage van klantinteracties, oplossingen en voortgang

Belangrijkste vereisten

• Bachelor in Informatietechnologie of vergelijkbaar

• Kennis van Oracle Database en/of Microsoft SQL Server

• Ervaring met Unix/Linux-omgevingen

• Bekendheid met remote support tools en moderne IT-infrastructuur

• Aantoonbaarheid van zelfstandig projectmanagement bij migraties/upgrades

• Uitstekende probleemanalytische vaardigheden

• Vloeiend Engels; extra talen zijn een pré

• Affiniteit met ERP-systemen en productie-/logistieke workflows

• Klantgericht en proactieve communicatieve vaardigheden

• Klantgericht

• Empathisch

• Proactief

• Oracle Database

• Microsoft SQL Server

• Unix/Linux

Over de vacature

Overview

In this role you drive customer success for Nutanix implementations, nurturing key relationships and accelerating product adoption. You collaborate with Support and Engineering to resolve issues, lead customer education, and coordinate resources across teams. You'll conduct health assessments, propose upgrade strategies, and maintain high satisfaction and retention within the first year. This is a remote-facing consulting position that blends technical mastery with strong client engagement and cross-functional collaboration.

Arbeidsvoorwaarden / Benefits

• remote work

Verantwoordelijkheden

• Manage and nurture assigned customer relationships to drive product adoption and success
• Assess installed base, provide usage maturity insights and best practices
• Coordinate with Support and Engineering to expedite critical issue resolution
• Facilitate customer training and identify further education opportunities
• Recommend upgrade plans and perform health checks to optimize environments
• Collaborate with internal teams to orchestrate resources for customer needs
• Proactively engage customers to address concerns and needs about Nutanix solutions
• Achieve KPIs related to customer satisfaction, product adoption, and retention in year one

Belangrijkste vereisten

• 6-10 years in technical customer-facing roles (e.g., Support Engineer, Systems Engineer, Technical Account Manager)

• Strong knowledge of virtualization, cloud computing, and data center technologies

• Excellent communication and interpersonal skills with a customer-centric focus

• High technical aptitude with understanding of infrastructure (storage, compute, network)

• Experience managing long-term customer relationships and driving product adoption

• Ability to collaborate across multiple teams and lead consultative conversations

• Bachelor's degree in Engineering (BE/B.Tech); advanced degree is a plus

• Fluent Dutch and English required

• customer-centric mindset

• excellent communication

• interpersonal skills

• virtualization

• cloud computing

• data center technologies

Over de vacature

Overview

In this role you drive customer success for Nutanix implementations, nurturing key relationships and accelerating product adoption. You collaborate with Support and Engineering to resolve issues, lead customer education, and coordinate resources across teams. You'll conduct health assessments, propose upgrade strategies, and maintain high satisfaction and retention within the first year. This is a remote-facing consulting position that blends technical mastery with strong client engagement and cross-functional collaboration.

Arbeidsvoorwaarden / Benefits

• remote work

Verantwoordelijkheden

• Manage and nurture assigned customer relationships to drive product adoption and success
• Assess installed base, provide usage maturity insights and best practices
• Coordinate with Support and Engineering to expedite critical issue resolution
• Facilitate customer training and identify further education opportunities
• Recommend upgrade plans and perform health checks to optimize environments
• Collaborate with internal teams to orchestrate resources for customer needs
• Proactively engage customers to address concerns and needs about Nutanix solutions
• Achieve KPIs related to customer satisfaction, product adoption, and retention in year one

Belangrijkste vereisten

• 6-10 years in technical customer-facing roles (e.g., Support Engineer, Systems Engineer, Technical Account Manager)

• Strong knowledge of virtualization, cloud computing, and data center technologies

• Excellent communication and interpersonal skills with a customer-centric focus

• High technical aptitude with understanding of infrastructure (storage, compute, network)

• Experience managing long-term customer relationships and driving product adoption

• Ability to collaborate across multiple teams and lead consultative conversations

• Bachelor's degree in Engineering (BE/B.Tech); advanced degree is a plus

• Fluent Dutch and English required

• customer-centric mindset

• excellent communication

• interpersonal skills

• virtualization

• cloud computing

• data center technologies

Over de vacature

Job Description

Nordson Packaging, a global leader in precision dispensing, fluid management, and related technologies, is seeking a highly motivated and talented Technical Customer Engineer to join our team in Italy. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment.

Summary of the role

The Technical Customer Engineer is responsible for providing on-site technical support, installation, maintenance, and troubleshooting services to customers throughout the North-West Piedmont region of Italy.

Working directly with customers, this role ensures the reliable operation and optimal performance of packaging equipment and systems, resolves technical issues efficiently, and delivers a high level of customer satisfaction.

The position requires strong technical expertise, a customer-focused approach, and frequent travel within the assigned territory.

In addition, the Technical Customer Engineer II collaborates closely with the Sales Team to identify service opportunities and contribute to the achievement of Service revenue and budget targets, supporting business growth and customer retention.

Role and Responsibilities

• Provide on-site technical support and service activities at customer locations throughout the North-West Piedmont region.
• Install, configure, maintain, and repair company equipment and systems according to established procedures.
• Diagnose and resolve hardware, software, and system-related issues in a timely manner.
• Document service activities, maintenance actions, and technical findings in accordance with company requirements.
• Manage customer service requests and effectively prioritize activities to meet service commitments.
• Collaborate closely with the Sales Team to identify service opportunities and achieve Service revenue and budget targets, supporting business growth and customer satisfaction.
• Establish and maintain strong customer relationships through professional communication and high-quality service delivery.
• Provide technical guidance and basic user training as needed.
• Ensure compliance with safety regulations, quality standards, and company policies while performing field activities.
• Maintain company tools, equipment, and service inventory in good working condition.
• Identify recurring issues and recommend improvements to enhance product performance and customer satisfaction.

Skills and Qualifications

• Electrician or electrical engineer or equivalent education and work experience ideally in the packaging industry.
• 3-5 years successful experience in industrial service or equipment installation is required.
• Experience with PLC troubleshooting required.
• Strong technical troubleshooting and analytical skills with the ability to diagnose and resolve complex equipment and system issues.
• Solid understanding of electromechanical, electronic, computer, and network-based systems.
• Ability to read, interpret, and apply technical documentation, manuals, and service procedures.
• Strong customer service orientation with the ability to build and maintain effective customer relationships.
• Excellent verbal and written communication skills both Italian and English
• Ability to work independently, manage multiple priorities, and make sound decisions in a fast-paced field environment.
• Strong organizational and time management skills
• Proficiency in Microsoft Office applications, SAP C4C, and other service management and customer relationship management (CRM) tools.
• Ability to collaborate effectively with cross-functional teams, including Technical Support, Engineering, Operations, and Sales.
• Adaptability and willingness to learn new technologies, products, and procedures.
• Ability to identify service business opportunities while supporting customers in the field.

Travel requirements

• This position involves an estimated 70-80% travel commitment across the assigned North-West Piedmont territory.
• Willingness to travel and support customers outside the designated territory based on business requirements, customer needs, and operational priorities, including periodic international travel.
• Willingness to travel overnight as needed to maintain high service levels and ensure prompt customer support.

About Nordson Packaging

Nordson Packaging is the leader in precision dispensing, fluid management, and related technologies. We serve the Packaging end market to improve production efficiency and product quality for a variety of packaging manufacturing processes. By joining our team today, you will help us bring innovative ideas to life.

Nordson Packaging is a global team that works to create technology that helps efficiently apply adhesives to meet both form and function for a wide variety of packaging applications like tankless technology, self-diagnostic and intuitive touch-screen controls, auto-fill technology, clean-cutoff and self-cleaning applicators, and pattern generation controls.

We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Packaging. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career.

Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included.

Interested?

If you are looking for an exciting opportunity to join an organization which values an inclusive and diverse workplace, please apply online with your CV.

Over de vacature

Job Description

Nordson Packaging, a global leader in precision dispensing, fluid management, and related technologies, is seeking a highly motivated and talented Technical Customer Engineer to join our team in Italy. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment.

Summary of the role

The Technical Customer Engineer is responsible for providing on-site technical support, installation, maintenance, and troubleshooting services to customers throughout the North-West Piedmont region of Italy.

Working directly with customers, this role ensures the reliable operation and optimal performance of packaging equipment and systems, resolves technical issues efficiently, and delivers a high level of customer satisfaction.

The position requires strong technical expertise, a customer-focused approach, and frequent travel within the assigned territory.

In addition, the Technical Customer Engineer II collaborates closely with the Sales Team to identify service opportunities and contribute to the achievement of Service revenue and budget targets, supporting business growth and customer retention.

Role and Responsibilities

• Provide on-site technical support and service activities at customer locations throughout the North-West Piedmont region.
• Install, configure, maintain, and repair company equipment and systems according to established procedures.
• Diagnose and resolve hardware, software, and system-related issues in a timely manner.
• Document service activities, maintenance actions, and technical findings in accordance with company requirements.
• Manage customer service requests and effectively prioritize activities to meet service commitments.
• Collaborate closely with the Sales Team to identify service opportunities and achieve Service revenue and budget targets, supporting business growth and customer satisfaction.
• Establish and maintain strong customer relationships through professional communication and high-quality service delivery.
• Provide technical guidance and basic user training as needed.
• Ensure compliance with safety regulations, quality standards, and company policies while performing field activities.
• Maintain company tools, equipment, and service inventory in good working condition.
• Identify recurring issues and recommend improvements to enhance product performance and customer satisfaction.

Skills and Qualifications

• Electrician or electrical engineer or equivalent education and work experience ideally in the packaging industry.
• 3-5 years successful experience in industrial service or equipment installation is required.
• Experience with PLC troubleshooting required.
• Strong technical troubleshooting and analytical skills with the ability to diagnose and resolve complex equipment and system issues.
• Solid understanding of electromechanical, electronic, computer, and network-based systems.
• Ability to read, interpret, and apply technical documentation, manuals, and service procedures.
• Strong customer service orientation with the ability to build and maintain effective customer relationships.
• Excellent verbal and written communication skills both Italian and English
• Ability to work independently, manage multiple priorities, and make sound decisions in a fast-paced field environment.
• Strong organizational and time management skills
• Proficiency in Microsoft Office applications, SAP C4C, and other service management and customer relationship management (CRM) tools.
• Ability to collaborate effectively with cross-functional teams, including Technical Support, Engineering, Operations, and Sales.
• Adaptability and willingness to learn new technologies, products, and procedures.
• Ability to identify service business opportunities while supporting customers in the field.

Travel requirements

• This position involves an estimated 70–80% travel commitment across the assigned North-West Piedmont territory.
• Willingness to travel and support customers outside the designated territory based on business requirements, customer needs, and operational priorities, including periodic international travel.
• Willingness to travel overnight as needed to maintain high service levels and ensure prompt customer support.

About Nordson Packaging

Nordson Packaging is the leader in precision dispensing, fluid management, and related technologies. We serve the Packaging end market to improve production efficiency and product quality for a variety of packaging manufacturing processes. By joining our team today, you will help us bring innovative ideas to life. Nordson Packaging is a global team that works to create technology that helps efficiently apply adhesives to meet both form and function for a wide variety of packaging applications like tankless technology, self-diagnostic and intuitive touch-screen controls, auto-fill technology, clean-cutoff and self-cleaning applicators, and pattern generation controls. We offer a supportive culture in a growing and dynamic work environment. Whether you're just beginning your career or you're a seasoned professional, there's a place for you to belong at Nordson Packaging. We offer hourly and salary positions in production, maintenance, customer service, quality, engineering, and more. We actively invest in our teams to help you build your skillsets and advance your career.

Our recruitment process is designed to identify the best qualified candidates for the role, and we are committed to ensuring a fair and equitable interview process. We are looking for candidates who have a passion for inclusion, diversity and equity, and the ability to contribute to a culture where all employees feel valued, respected, and included.

Interested?

If you are looking for an exciting opportunity to join an organization which values an inclusive and diverse workplace, please apply online with your CV.

#LI-CM1

Over de vacature

Overview

In this role, you lead safe and reliable engineering and maintenance operations, guiding the team to meet health, safety and regulatory requirements while boosting asset reliability and operational performance. You will collaborate with internal stakeholders to prioritize maintenance, drive continuous improvement, and support commissioning and management of change. This position offers a chance to influence site safety culture and maintenance excellence within a global coatings company. You will balance hands-on leadership with strategic budgeting and policy development to sustain high standards and impact production outcomes.

Arbeidsvoorwaarden / Benefits

• rewards and benefits
• health and well-being support
• career development opportunities
• inclusive team culture
• work-life balance options
• flexible work arrangements

Verantwoordelijkheden

• Enforce safe systems of work and ensure accountability for health and safety performance
• Provide safe equipment, working environment, and PPE for employees and contractors
• Ensure proper training, instruction, and supervision for safe task execution
• Strive for zero recordable injuries via Near Misses, safety observations, and timely corrective actions
• Investigate safety and environmental incidents and establish countermeasures
• Drive planned maintenance using historical data and condition-based monitoring
• Offer technical support and guidance to the Engineering team
• Prioritize and allocate Maintenance resources through liaison with internal stakeholders
• Contribute to Management of Change and Commissioning to hand over safe, fit-for-purpose equipment
• Lead Engineering Continuous Improvements to boost production and site safety, aligned with SEVESO/COMAH standards
• Support HAZOPs and process design when invited
• Serve as site custodian for Rx maintenance activities where relevant
• Ensure training and competencies within the Maintenance Team
• Promote safe methods of work via risk assessments and procedures
• Manage the Engineering budget to meet targets
• Develop Engineering Procedures and Maintenance worksheets as part of the Eng Management System
• Align maintenance with OEM recommendations, reliability data, HSE guidance, and RAGAGEPs
• Champion Rx asset management and critical spare parts (where relevant)
• Contribute to Engineering BMS reports and Rx data analysis for maintenance improvements
• Cover Engineering Manager responsibilities when the manager is off-site
• Process MIRA actions and Near Miss reports relevant to Maintenance
• Perform other duties as assigned

Belangrijkste vereisten

• 5+ years in a hazardous manufacturing environment

• Working knowledge of country health and safety legislation

• Experience with Computerised Maintenance Management Systems (CMMS)

• 2+ years experience with RAMS and PTW issuing/approving

• NEBOSH would be advantageous

• Regulatory understanding including PSSR, LOLER, PUWER, SEVESO/COMAH

• Knowledge of ATEX and DSEAR

• Proficiency with CMMS and Microsoft Office

• Experience with Commissioning and Management of Change

• Strong communication skills and a proactive, hands-on attitude

• Ability to work under pressure and maintain high ethical standards

• effective communicator across departments

• hands-on, can-do attitude

• team player

• CMMS

• RAMS

• PTW

Over de vacature

Als Mechanical Engineer voor current products werk je praktisch en doelgericht aan verbeteringen van bestaande koffie-espresso machines. Je beoordeelt technische vragen, werkt voorstellen uit en zet oplossingen om in concrete bouw- en testopdrachten. Je hebt veel contact met productie, kwaliteit, technical support en productmanagement en coördineert invoering van nieuwe onderdelen in de assemblagelijn. Je krijgt verantwoordelijkheid en vrijheid om zelfstandig prototypes te bouwen en te testen in de R&D-werkplaats. Het werk is dynamisch door uiteenlopende prioriteiten en korte doorlooptijden. Je haalt voldoening uit kleine verbeteringen die de productie verbeteren en kosten verlagen. Je werkt in teamverband maar voert ook zelfstandig technische taken uit en bewaakt prioriteiten en documentatie.

Functie-inhoud

• Je beoordeelt en werkt technische vragen en verbeterverzoeken uit vanuit productie, kwaliteit, technische ondersteuning en productmanagement.
• Je ontwikkelt en implementeert verbeteringen aan het huidige assortiment koffie-espresso machines op basis van feedback en kostendoelstellingen.
• Je ontwerpt, bouwt en test prototypes in de R&D-werkplaats en coördineert invoering van nieuwe onderdelen in de assemblage.
• Je bewaakt prioriteiten, stemt af met stakeholders en zorgt dat wijzigingen duidelijk en uitvoerbaar gedocumenteerd worden.

Functie-eisen

• Afgeronde hbo-opleiding in Industrieel Product Ontwerpen of vergelijkbare technische opleiding.
• Minimaal drie jaar ervaring als mechanical engineer of constructeur in productontwikkeling of productverbetering.
• Ervaring met CAD-software; ervaring met Creo is benodigd en je kunt tekeningen zelfstandig uitwerken.
• Goede kennis van productieprocessen, communicatief vaardig, praktisch ingesteld en vaardig in zowel Nederlands als Engels.

Wij bieden

• Een marktconform salaris met pensioenregeling en reiskostenvergoeding, passend bij ervaring en verantwoordelijkheden.
• 32 tot 40 uur per week, flexibele werktijden en de mogelijkheid om deels vanuit huis te werken.
• 40 vakantiedagen bij een fulltime dienstverband, vers fruit op de werkvloer en regelmatig een traktatie of borrel.
• Moderne werkplek in een nieuw pand met goede faciliteiten, plus een persoonlijk budget voor gezondheid en vitaliteit.

Over de vacature

As demand for advanced technologies such as AI, automotive electronics, and smart devices continues to grow, so does the need for semiconductors. These chips are essential to countless industries and technologies that shape our daily lives.

At Trymax, we develop and build high-tech, plasma-based wafer-processing equipment for semiconductor manufacturers worldwide. As a Field Service Engineer, you work at the forefront of wafer-processing technology, supporting our growing international customer base with installation, service, and technical expertise. Are you ready for the challenge? What will be your role?
As a Field Service Engineer, you install, commission, service, and troubleshoot our systems at customers' sites, primarily across Europe and occasionally in the USA or Asia. You are the first point of contact for technical support and advice and, where applicable, carry out preventive maintenance under service agreements. Since much of the first-line maintenance is performed by our customers’ own technical teams, you also play an important role in training their service engineers and operators. By accurately documenting system issues and solutions, advising customers on spare parts management, and sharing technical knowledge, you help maximize system uptime and performance. You will also regularly meet with customers to discuss technical progress, service activities, and follow-up actions. When you are not travelling or working at a customer site, you will be based at our headquarters in Nijmegen. Here, you provide remote technical support to customers and colleagues via Microsoft Teams, email, and telephone, and prepare system upgrades, service activities, and documentation. You will join our team in Nijmegen and receive extensive onboarding and technical training to become familiar with our systems, technology, and procedures. In addition, experienced colleagues will provide hands-on, on-the-job training. Your manager will be in touch with you on a regular basis to support you. What we expect from you
You are passionate about our systems and are eager to learn about our latest developments and technologies. Driven by keeping our customers operational, you are focused on delivering results. As you’ll be working both independently and together with colleagues, you enjoy the balance between autonomy and teamwork. Your communication skills help you connect easily with colleagues, customers’ operators, engineers, and management. Most of the customers you support are located in Europe, but occasionally you may be called upon for assignments outside Europe, including in the USA or Asia. That is why you enjoy travelling and are comfortable working in an international environment. The knowledge and experience you bring to Trymax include:

• A Bachelor’s degree in Mechatronics, Electrical Engineering, Mechanical Engineering, or a comparable technical field. You may also have gained this level of knowledge through relevant work experience.
• Knowledge of multiple disciplines, such as mechanical, electro-mechanical and electrical engineering, electronics, pneumatics, vacuum systems, robotics, RF technology, and software. Knowledge of vacuum systems, robotics, and/or RF technology is considered a plus.
• Work experience in equipment engineering, servicing, or the semiconductor industry is desirable, but not essential.
• Good working knowledge of English. Knowledge of German and/or Dutch is a plus.
• A valid driving licence.

What you’ll get in return
This role gives you the opportunity to work with some of the latest semiconductor technology as part of a team of dedicated specialists. At Trymax, you will find a strong sense of team spirit and belonging in an informal and open atmosphere. We also regularly organise activities to strengthen our community. You can also expect:

• A salary between €4,000 and €6,000 gross per month, depending on your knowledge and experience.
• A one-year contract, with the prospect of a permanent position.
• Participation in the PME Pension Fund (Metalektro).
• 27 vacation days and 13 scheduled paid days off.
• Personal development, training, and education, geared to your needs.
• Travel allowance for your daily commute.
• A laptop and mobile phone.

About Trymax
We develop and build high-tech equipment for the semiconductor industry. Our systems process wafers using plasma technology, a unique product in a growing market. Trymax has sales and service offices in the United States, China, and Europe. Our headquarters and production facility are located in Nijmegen. Around 120 people worldwide work for Trymax, approximately 95 of whom are based in Nijmegen. Apply now!
Interested in finding out more about this vacancy? We would be delighted to receive your application. Use the application form , where you can also upload your CV and cover letter. If you have any questions about the job or the selection process, please call Emma Lalesse, HR Officer, at +31 24 350 0809 or email us at hr@trymax-semiconductor.com . We’re looking for candidates, not parties wishing to supply us with something!

Over de vacature

Flying is the second greatest thrill known to people, landing is the first.

Are you ready to play a key role in the production of high-tech landing gear components?

At Fokker Landing Gear in Papendrecht, they are expanding the Manufacturing Engineering team and looking for a Manufacturing Engineer to help ensure seamless production processes. If you thrive in a high-tech environment and want to contribute to the safety of aviation, this role is perfect for you!

Over het bedrijf

Fokker Landing Gear specializes in the design, development, production, and assembly of landing gears and related systems. They also focus on repair and reassembly of existing systems. Their work supports world-renowned aircraft, including the Apache combat helicopter, the F-35 Lightning II (JSF), the Bombardier Dash 8 Q400, and the NH90 maritime combat helicopter.

Over de functie

As a Manufacturing Engineer (Product & Planning), you will be a crucial member of an Integrated Product Team (IPT), ensuring smooth operational deliveries. You will be responsible for analyzing production characteristics, managing Level 1 (L1) non-conformities, defining temporary production instructions, and preparing dispositions for Level 2 (L2) non-conformities. Your goal? Advancing to a Non-Conformity (NC) approver role while continuously improving production processes.

Your responsibilities

• Develop technical solutions to complex problems, ensuring compliance with GKN Aerospace Health, Safety, and Environmental policies.
• Provide technical support for manufacturing development and integration for production.
• Resolve issues related to vendor schedules and quality.
• Utilize root cause analysis, preventative and corrective actions to reduce non-conformities.
• Oversee the implementation of tooling and production planning using Zero Defect Manufacturing (ZDM) methodologies.
• Manage product development, first article development, configuration changes, and build process implementation.
• Deliver measurable, results-driven improvements aligned with Operational & Program goals.
• Foster strong working relationships with internal and external stakeholders.
• Continuously improve production processes by implementing Lean initiatives.

Wie ben jij?

• Experience in product/process introduction (industrialization) and production process improvements.
• 3 to 7 years experience in Manufacturing Engineering.
• A degree in Engineering (Aerospace, Mechanical, Automotive, or related field).
• Strong influencing and relationship-building skills within a global organization.
• Working knowledge of LEAN processes and quality systems (ISO9000, AS9100, or D1-9000).
• Excellent documentation and reporting skills.
• Knowledge and experience with hard metals;
• Familiarity with machining processes (milling, mill-turn, boring, honing) and/or surface treatment processes (heat treatment, plating, shot-peen, NDI) is a strict requirement.
• Fluency in English (written and spoken).

Preferred

• Strong influencing and relationship-building skills within a global organization.
• Working knowledge of LEAN processes and quality systems (ISO9000, AS9100).

What's in it for you

Joining Fokker Landing Gear, part of GKN Fokker, means working in an innovative, international environment with a strong legacy in aircraft manufacturing. You will benefit from:

• A gross salary between € 3500 and € 5500 per month, based on CAO Metalektro and experience.
• Pension scheme and travel allowance according to CAO Metalektro.
• A collaborative environment where engineering excellence is at the heart of what they do.
• Opportunities for career growth and personal development.

Interesse?

Ready to take off with us? WFS PRO is managing the recruitment process for this role. Apply now and become part of an engineering team that shapes the future of aerospace manufacturing! If you have additional questions please reach out to Niels Kloostra, he's available via n.kloostra@wfspro.nl and on his mobile +31 (0)6 30 68 13 49

Over de vacature

Ready for a challenge?

Then Just Eat might be the place for you.
We're a leading global online delivery platform, and our vision is to empower everyday convenience. Whether it's a Friday-night feast, a post-gym poke bowl, or grabbing some groceries, our tech platform connects tens of millions of customers with hundreds of thousands of restaurant, grocery and convenience partners across the globe.

About this role

As our CRM Platform Engineer, you will join the CRM Platforms team-the exclusive owners and experts of the CRM technology stack at Just Eat .

This is a Junior to Medior level role, making it the perfect landing spot for someone who is hungry to grow. You don't need a heavy technical background to start; if you have a solid logical foundation and a passion for learning, we will provide the onboarding and mentorship you need to become a specialist. You'll be mentored by experts as you take ownership of industry-leading tools like Braze, Salesforce Marketing Cloud, and Hightouch. You aren't just a support function; you are a platform owner, ensuring our tech is reliable, automated, and ready for the next big innovation.

These are some of the key components to the position:

• Platform Ownership: Take pride in managing our CRM ecosystem, aiming high to ensure platforms are healthy and performing at their full potential.
• Technical Enablement: Support global CRM teams by driving excellence in the technical aspects of their campaigns and finding the best solutions.
• Continuous Learning: Deep dive into Salesforce Developer Experience (DX) and master the "under the hood" mechanics of CRM engineering.
• Bridge the Gap: Collaborate with non-technical stakeholders to translate campaign goals into technical reality through clear communication.
• Automation & Reliability: Help manage data flows via Hightouch, ensuring our platforms are scalable and capable of reaching millions of customers.
• Proactive Delivery: Bring a "get things done" attitude to every task, taking responsibility for high-quality results from start to finish.

What will you bring to the team?

• A Solid Foundation: You have a basic understanding of CRM platforms and a logical mindset to help us stay committed to achieving goals.
• Eagerness to Learn: A genuine curiosity for "Marketing Tech" and a desire to aim higher and drive excellence in tools like Braze and SFMC.
• Strong Communication: You can simplify complex ideas for non-technical colleagues, helping the team move fast and create clarity.
• Collaborative Spirit: You develop an understanding of internal and external partners to ensure we are doing what is right for our users.
• Project Management: You are organised and act responsibly while managing your workload to make a lasting impact.
• Problem-Solving: You enjoy diving into challenges and aren't afraid to ask questions to help the team succeed.
• Fluency in English: Essential for collaborating with our diverse global teams and navigating our technical documentation.

At JET, this is how we play

Our teams forge connections internally and work with some of the best-known brands on the planet, giving us truly international impact in a dynamic environment. Being the best at what we do isn't just about delivering on our strategy. It's a competition for something incredibly valuable - our customers' choice. Every time a customer decides where to order, they're picking a side.

At the heart of the JET Customer League are our values and behaviours. They guide every interaction, every decision, every innovation. These are the actions we need to perform consistently and brilliantly, to surpass the competition and earn our customers' loyalty, again and again. Fun, fast-paced and supportive, the JET culture is about movement, growth, helping one another to succeed and celebrating wins. By truly living our values and embodying our behaviours, we're building a customer-first culture which enables us to stay one step ahead of the competition.

Inclusion, Diversity & Belonging

No matter who you are, what you look like, who you love, or where you are from, you can find your place at Just Eat . We're committed to creating an inclusive culture, encouraging diversity of people and thinking, in which all employees feel they truly belong and can bring their most colourful selves to work every day.

What else are we delivering?

Want to know more about our JETers, culture or company? Have a look at our career site where you can find people's stories, blogs, podcasts and more JET journeys.

Are you ready to join the team? Apply now!

Over de vacature

Ben jij dé technische sparringpartner die graag klanten verder helpt? Start als Technical Sales Engineer in Etten-Leur en verdien tot €5.400,- per maand (o.b.v. 40 uur)! Pak deze kans bij een innovatief bedrijf en solliciteer vandaag nog!
Dit ga je doen

Hey, leuk dat je kijkt naar deze vacature! In de functie van Technical Sales Engineer ben jij het eerste aanspreekpunt voor klanten met technische vragen over onze producten en oplossingen. Je denkt actief mee, luistert goed naar de klant en biedt direct praktische ondersteuning – telefonisch, online of soms op locatie in Europa. Je schakelt dagelijks met Sales Managers, Sales Support en R&D om samen de beste service te bieden en processen bij de klant te verbeteren.

Naast klantcontact ben je ook betrokken bij het signaleren van trends en ontwikkelingen in de markt. Jouw input helpt het team scherp te blijven en nieuwe kansen te benutten. Je rapporteert aan de Technical Sales Manager en reist ongeveer eens per maand naar klanten, meestal binnen Europa.

Zin in een afwisselende baan waar je veel vrijheid krijgt en écht het verschil kunt maken voor klanten? Dan hoor ik graag van je! Wil je meer info of direct solliciteren? Neem gerust contact op met Estelle. Ze denkt graag met je mee!

Dit krijg je

• Bruto maandsalaris tot €5.400,- o.b.v. 40 uur
• 13e maand en uitstekende secundaire arbeidsvoorwaarden
• 24 vakantiedagen en 11 ATV-dagen
• Pensioenregeling met 80% werkgeversbijdrage
• Reiskostenvergoeding en WIA-verzekering
• Zelfstandige functie met veel vrijheid en verantwoordelijkheid
• Gezellig, professioneel team en informele sfeer
• Ruimte voor opleidingen en doorgroeimogelijkheden
• Moderne, goed bereikbare werkplek in Etten-Leur
• Internationale werkomgeving
• Flexibele werktijden (32-40 uur per week)

Dit vragen we

• Minimaal hbo werk- en denkniveau
• 2 jaar of meer ervaring in een technische (sales) functie
• Kennis van kunststofproductie of chemische processen
• Ervaring met technische documentatie
• Bereidheid om te reizen voor klantbezoeken (voornamelijk in Europa)

Dit wordt je werkplek

Dit is jouw werkplek: Je komt te werken bij een toonaangevende, internationale producent in de kunststof- en chemiesector. Je wordt onderdeel van een informeel en gedreven team waar samenwerken, initiatief nemen en jezelf ontwikkelen centraal staan. Er is veel vrijheid in je werk en je krijgt volop kansen om te groeien. De werktijden zijn flexibel (32-40 uur per week) en je werkt vanuit het moderne kantoor in Etten-Leur. Het contact met verschillende afdelingen zorgt voor een dynamische werkomgeving.

Over de vacature

Vacaturebeschrijving

Build a career in a role where technology, teamwork, and personal growth come together. As a Technical Operator / Site Engineer, you'll work with advanced automated systems while enjoying excellent employment conditions, including a direct contract, travel allowance, and a gross monthly salary of up to €3,650. You'll be trusted to take ownership of your work and supported through training opportunities that help you continue developing your technical skills. Read on and apply now!

Manpower is looking for Technical Operators / Site Engineers in the Amersfoort region.

Online shopping is here to stay, and you'll be part of the evening team at a client location of the largest mail-order company in the Netherlands. The sound of the machines means everything is running smoothly until suddenly it stops and red alerts appear on your screen.
A malfunction! With quick action and teamwork, you solve the problem and get the process back on track. Your Responsibilities:

• Detecting, analyzing, and resolving first-line malfunctions

• Performing preventive maintenance

• Reporting in the system to help resolve future issues faster

  What's in It for You

• Gross salary: €2,800 - €3,650 per month

• Direct contract with the client

• Travel expense reimbursement according to company policy

• Full-time position (40 hours per week)

• Shift allowances of 25%, 50%, and 100%

• 25 vacation days plus the option to buy five extra days

• Collective health insurance

• On-the-job training to become an independent service technician

• Additional courses, such as VCA, Electrical Switching, Maintenance Technology, Process Automation, and NEN3140

Over de werkgever

The client is a growing family-owned company serving customers throughout the Benelux. They specialize in delivering technical solutions for automated parcel sorting systems and offer services ranging from consultancy and installation to maintenance and support. Their customer network includes leading logistics organizations with operations across the Netherlands and Belgium. Although the head office is located in Ede, employees are spread across multiple regions within the Benelux. The company believes success is achieved together and invests heavily in collaboration, trust, and knowledge sharing. Employees are given responsibility, encouraged to think proactively, and supported in their professional development within an open and accessible work culture.

We cannot share more details about the organization at this time. During the next steps of the application process, we will provide you with more information. '

Working hours 
This full-time position involves working in three shifts.

Over de vacature

Are you the CNC specialist with a 5-axis turning and milling background that will provide assistance to the Manufacturing Engineering Team and solves problems with a smile?

Please reach out, and become our next CNC Programmer - CAM Engineer at GKN-Fokker Landing Gear!

Over het bedrijf

Fokker Landing Gear, part of GKN Fokker, is a recognized specialist in landing gear and related systems. They focus on the design and development, production and assembly of complete landing gears, as well as the repair and reassembly of systems already in use. In doing so, they work on the most famous aircraft and helicopters; think of the Apache combat helicopter, the F-35 Lightning II (JSF), the Bombardier Dash 8 Q400 and the multipurpose NH90 maritime combat helicopter.

Over de functie

As a skilled and experienced CNC Programmer CAM Engineer you will be responsible for creating NC programs for multi-axis milling and mill-turn machines, as well as providing essential shop floor support to CNC machine operators. This role is critical in ensuring the efficient and precise manufacturing of landing gear parts, and you will play a key role in solving machining problems as they arise.

What you'll do

• Develop / optimize NC programs for multi-axis milling and mill-turn machines using advanced CAM software.
• Provide hands-on shop floor support to CNC operators, ensuring smooth and efficient operations.
• Troubleshoot and resolve machining issues on the shop floor to maintain production quality and efficiency.
• Work closely with other departments to ensure that machining processes meet the required specifications and standards.
• Continuously improve machining processes and contribute to the development of best practices within the department.
• Utilize root cause analysis, preventative and corrective action to reduce / eliminate non-conformances.
• Develop / improve standard operation procedures (SOP).

Wie ben jij?

• Bachelor's in engineering (e.g. Engineering, Manufacturing Technology).
• 5 Years' experience in a hard metal manufacturing and a passion for precision, multi-axis machining.
• Proficient in using CATIA V5. Experience with TopSolid, Siemens NX CAM, Vericut, CrashGuard, Tooltech and TDM is an advantage.
• Strong ability to read and interpret Siemens NC code and Heidenhain.
• Extensive experience with on-machine probing.
• Experience and knowledge with hard metals;
• Proven experience with deep-hole drilling, mill-turning and turning techniques.
• Solid background in operating and programming CNC machines, with a deep understanding of multi-axis milling and mill-turn operations. Problem-solving skills and the ability to work effectively in a fast-paced manufacturing environment.
• Good understanding of GD&T.
• Willingness to work flexible hours to support production activities.
• Excellent communication and teamwork skills to collaborate effectively with CNC operators and other team members.
• Are you a contractor? This opportunity could be very suitable for you as well!

What's in it for you

GKN-Fokker Landing Gear demonstrates passion for innovation and the employees are rightly proud for what they engineer and build. This is a truly challenging work environment: a role where you contribute as an individual but also as a member of a diverse and international team of experts. At GKN-Fokker Landing Gear, they not only provide you with the tools to perform at the best of your capabilities, but they also support and promote your technical and personal development.

Furthermore, they offer you:

• A gross monthly salary up to € 5500,- based on the CLA Metalektro and in line with your experience and qualifications
• At least one year contract via WFS PRO (including possible extension after the first year)
• 8% holiday allowance.
• 25 paid holidays for full-time employment,
• Working conditions according to the CAO Metalektro, including an excellent pension scheme (PME) and travel allowance,
• A pleasant and informal working environment, in which we work together to achieve the best result for our customers in a pleasant atmosphere.

Next to a competitive package, they will offer you a world of opportunities: they want to see your career fly! They will support your career progression by providing you with learning and development opportunities. That's the beauty of being part of a global business, once you're on board you never know where you career journey may take you!

Interesse?

WFS PRO is managing the recruitment process for this role. Apply now and join GKN-Fokker Landing Gear! The application process is carried out by WFS PRO. If you have questions, please contact Niels Kloostra at n.kloostra@wfspro.nl

Over de vacature

Are you eager to build up technical skills and having your long term career within the technical industry?
What will you do?
After sales support to dealers across EMEA:

• E-mail and helpdesk support by using CRM system
• Interact directly with customers to diagnose and solve technical problems in a set time frame
• Analyze and clarify customer requests by researching and troubleshooting the existing knowledgebase
• Inspect cases for technical complexity and advise our customers timely with quality
• Direct support to dealers and distributors by onsite interventions
• Check product documentation for completeness and accuracy
• Communicate with development teams in order to find solutions
• Complete each case by double checking the result, close the case if the issue is fixed and customer is happy.

Exhibition support

• Installation, operating and dismantling of machines for exhibitions
• Advising customers about specific applications and supporting sales during the show
• Try to get leads together with our sales team on the booth

Training

• Organizing and hosting technical trainings for dealers and distributors
• Monitoring dealer skills and alerting management about technical issues
• Elaborate the knowledge base for internal / external use

Refurbishing of second hand machines

• Inspection and repair of returned / used machines for re-sale
• Maintenance of machines located in the showroom
• Inspection and repair of damaged machines

Warranty check

• Checking and approving warranty claims from our dealers
• Advising our warranty department about proper warranty terms and conditions

Sales support

• Advising and training sales department persons about machine specifications, proper usage and features
• Advising sales when specific applications or machine requirements arise

Customer service support

• Supporting customer service department with questions about delivery conditions and availability of parts

Requirements Who are you?
Are you a fresh graduate?
Education

• MBO electronics /mechanics or HBO level, gained through work experience
• Fluent written and oral communication skills in English
• Fresh graduates
• More than average mechanical engineering machinery-skills gained through trainings or schooling

Work experience

• 0-1 year experience max.
• Motivation and theoretical thinking are important to become a good (field) engineer in future and to support our customers properly.
• Experience in a similar/ printing industry is strong preferred.
• Experience repairing machineries
• Experience in R&D is a big bonus.

General:

• Customer and service minded attitude and highly motivated
• Eager to learn new technology
• Travelling throughout EMEA on a regular basis
• Team player
• Organized
• Flexible
• Good communicative skills and technical minded / tech savvy
• Candidates must live in Amsterdam region (The Netherlands) and willing to work 100% onsite (hybrid is not possible)
• Candidates must hold a valid working permit, our client does not offer sponsorship
• You must have an EU driver's license

Our client is prepared to invest in starting technicians who are highly motivated. Our client is open for fresh graduates who are technical / mechanical minded Benefits

• This is a long term position - based on full time
• The salary is between EUR 2800, and max. EUR 3000, per month gross, based on full time. The salary is depending on education, experience and industry background.
• Travelcost will be reimbursed
• The initial contract will be via Undutchables, approx. 6-7 months. If all goes well, it will be extended. The 2nd contract will be with the company.

Application Procedure If you are interested in this vacancy, you can apply by clicking on the button above. Your application will be sent directly to the recruiter in charge. IMPORTANT: if you are not yet registered with Undutchables we kindly ask you to do so. Your information will be handled in the strictest confidence and your CV will not be sent to a company unless you have given prior permission.We will invite you for an extensive interview, as soon as any potential job opportunities arise. We will advise you on issues regarding employment in the Netherlands. Then, if possible, we will introduce you to a prospective company and provide support during the selection procedure.