Technical support Vacatures

Over de vacature

Als Procesoperator Technical Support ben je verantwoordelijk voor het soepel laten draaien van het automatische orderpickproces in een technisch uitdagende omgeving. Je monitort continu procesparameters, lost technische storingen op en voert preventief onderhoud uit aan het orderpicksysteem. Je werkt nauw samen met collega’s van verschillende afdelingen om verstoringen snel te verhelpen en verbeteringen door te voeren. Het werk vraagt een praktische, probleemoplossende houding en een goed begrip van elektromechanische systemen. Je krijgt een fulltime aanstelling van 40 tot 42,5 uur per week in Zwolle, met ruimte voor initiatief en procesverbetering. De functie is geschikt voor iemand met een technische mbo-achtergrond en ervaring als operator. Functie-inhoud Monitoren en controleren van het logistieke orderpickproces en waar nodig direct ingrijpen om continuïteit te waarborgen. Oplossen van technische storingen en uitvoeren van preventief onderhoud aan het automatisch orderpick-systeem (Vanderlande Adapto). Analyseren van procesgegevens, signaleren van knelpunten en voorstellen doen voor concrete procesverbeteringen. Samenwerken met collega’s van verschillende afdelingen en nauwkeurig documenteren van storingen en onderhoudsactiviteiten. Functie-eisen Afgeronde mbo-opleiding in procestechniek, werktuigbouwkunde of vergelijkbare technische richting. Ervaring als procesoperator of in een vergelijkbare technische functie met verantwoordelijkheid voor continuïteit. Proactieve, zelfstandige werkhouding met sterk probleemoplossend vermogen en oog voor veiligheid. Goede beheersing van Nederlands en Engels, communicatief vaardig en functioneel in teamverband. Wij bieden Een uitdagende, afwisselende fulltime functie binnen een technisch en dynamisch werkproces. Een informele en collegiale werksfeer waarin praktijkoplossingen worden gewaardeerd en snel doorgevoerd. Volledige werktijd 40 - 42,5 uur per week met duidelijke taken en verantwoordelijkheden. Ruimte voor initiatief, verantwoordelijkheid bij procesverbetering en doorgroeimogelijkheden binnen operaties.

Over de vacature

Bij SPM Instrument geloven we dat de beste technische leiders midden in de praktijk staan. Daarom zoeken we geen manager die vanaf de zijlijn aanstuurt, maar een technisch expert die collega`s coacht, klanten ondersteunt en zelf betrokken blijft bij uitdagende praktijken.

Bij SPM Instrument combineer je technische diepgang met leiderschap. Je coacht het technische supportteam, ondersteunt klanten bij complexe vraagstukken en werkt mee aan innovatieve oplossingen op het gebied van Condition Monitoring. Een rol waarin je techniek en mensen verbindt.

Over het bedrijf

SPM Instrument is wereldwijd toonaangevend op het gebied van conditiebewaking. Al meer dan 50 jaar helpen we industriële organisaties om de betrouwbaarheid van hun installaties te vergroten, ongeplande stilstand te voorkomen en onderhoud slimmer in te richten.

Wat SPM écht onderscheidt? Wij ontwikkelen vrijwel alles zelf. Van sensoren en meetapparatuur tot ons eigen softwareplatform Condmaster. Daardoor lopen we voorop in technologische innovaties en bieden we oplossingen die verder gaan dan alleen het meten van de machinecondities.

We helpen klanten ook bij het optimaliseren van productieprocessen, het besparen van energie en het verhogen van de prestaties van hun installaties.

Ondanks onze internationale organisatie voelt SPM Instrument als een betrokken MKB-bedrijf. De lijnen zijn kort, collega's kennen elkaar en je krijgt veel vrijheid om je werk op jouw manier in te richten. Je werkt deels vanuit huis, bent regelmatig onderweg naar klanten en komt samen met collega's op ons kantoor in Drunen.

De organisatie groeit de komende jaren verder en jij speelt daarin een belangrijke rol.

Over de functie

Als Technical Support Manager bouw en begeleid je een sterk Technical Support team, waarin je medewerkers coacht en hun talenten ontwikkelt.
Je:

• Speelt zelf een actieve rol als trillingsspecialist en technisch adviseur.
• Beheert samen met je team de geïmplementeerde meetsystemen en servicecontracten.
• Breidt ons servicepartnernetwerk verder uit.
• Ondersteunt (internationale) klanten met technische vraagstukken en oplossingen.
• Spot en creëert nieuwe commerciële servicekansen.
• Neemt plaats in het Management Team en draagt bij aan de strategische koers van ons bedrijf.

Waarom deze functie interessant is

Je krijgt veel verantwoordelijkheid, binnen een organisatie met korte lijnen en weinig hiërarchie. Bij SPM krijg je de ruimte om processen te verbeteren, ideeën aan te dragen en zelfstandig beslissingen te nemen.
Je werkt bovendien met technologie die wereldwijd tot de top behoort.

Dat betekent:

• veel technische uitdaging;
• internationale samenwerking;
• korte lijnen;
• veel vrijheid;
• een informele werksfeer;
• een groeiende organisatie waarin jouw invloed zichtbaar is.

Wat vragen wij van jou

Je bent iemand die techniek begrijpt én mensen kan meenemen.
Daarnaast beschik je bij voorkeur over:

• Hbo-diploma in Elektrotechniek, Werktuigbouwkunde of een vergelijkbare richting;
• ervaring met trillingsmeettechniek en/of condition monitoring;
• leiderschapskwaliteiten: je hebt ervaring met het aansturen en coachen van een technisch team;
• goede communicatieve vaardigheden in Nederlands en Engels;
• een zelfstandige en proactieve werkhouding.

Wat bieden wij jou

Bij SPM krijg je veel vertrouwen én vrijheid.
Je kunt rekenen op:

• salaris vanaf € 5.500,- bruto per maand, afhankelijk van ervaring en expertise.
• een internationale werkomgeving;
• veel vrijheid in de invulling van je werk;
• hybride werken;
• 25 vakantiedagen + 6 extra vrije dagen;
• winstdelingsregeling;
• leaseauto;
• laptop en telefoon;
• jaarlijks salarisreview.

Meer informatie

Neem contact op met Inge via 06-38447204 of mail naar inge@werktvoorjou.nl .

Solliciteren

Een functie als Technical Support Manager vraagt om de juiste klik, zowel inhoudelijk als persoonlijk. Daarom gaan we graag met je in gesprek. We vertellen je met plezier meer over SPM Instrument, ons team en de uitdagingen binnen deze rol.

Zien we je snel?
Neem contact op met Inge via 06-38447204 of mail naar inge@werktvoorjou.nl .

Over de vacature

Als Mechanical Engineer voor current products werk je praktisch en doelgericht aan verbeteringen van bestaande koffie-espresso machines. Je beoordeelt technische vragen, werkt voorstellen uit en zet oplossingen om in concrete bouw- en testopdrachten. Je hebt veel contact met productie, kwaliteit, technical support en productmanagement en coördineert invoering van nieuwe onderdelen in de assemblagelijn. Je krijgt verantwoordelijkheid en vrijheid om zelfstandig prototypes te bouwen en te testen in de R&D-werkplaats. Het werk is dynamisch door uiteenlopende prioriteiten en korte doorlooptijden. Je haalt voldoening uit kleine verbeteringen die de productie verbeteren en kosten verlagen. Je werkt in teamverband maar voert ook zelfstandig technische taken uit en bewaakt prioriteiten en documentatie. Functie-inhoud Je beoordeelt en werkt technische vragen en verbeterverzoeken uit vanuit productie, kwaliteit, technische ondersteuning en productmanagement. Je ontwikkelt en implementeert verbeteringen aan het huidige assortiment koffie-espresso machines op basis van feedback en kostendoelstellingen. Je ontwerpt, bouwt en test prototypes in de R&D-werkplaats en coördineert invoering van nieuwe onderdelen in de assemblage. Je bewaakt prioriteiten, stemt af met stakeholders en zorgt dat wijzigingen duidelijk en uitvoerbaar gedocumenteerd worden. Functie-eisen Afgeronde hbo-opleiding in Industrieel Product Ontwerpen of vergelijkbare technische opleiding. Minimaal drie jaar ervaring als mechanical engineer of constructeur in productontwikkeling of productverbetering. Ervaring met CAD-software; ervaring met Creo is benodigd en je kunt tekeningen zelfstandig uitwerken. Goede kennis van productieprocessen, communicatief vaardig, praktisch ingesteld en vaardig in zowel Nederlands als Engels. Wij bieden Een marktconform salaris met pensioenregeling en reiskostenvergoeding, passend bij ervaring en verantwoordelijkheden. 32 tot 40 uur per week, flexibele werktijden en de mogelijkheid om deels vanuit huis te werken. 40 vakantiedagen bij een fulltime dienstverband, vers fruit op de werkvloer en regelmatig een traktatie of borrel. Moderne werkplek in een nieuw pand met goede faciliteiten, plus een persoonlijk budget voor gezondheid en vitaliteit.

Over de vacature

Your responsibilities : Provide customer service in both German and English by phone, email, and chat Support customers with licensing, pricing, payment details, and order status Prepare quotes for software licences and renewals Follow up on quotes to support the sales process Process orders accurately, ensuring correct details and timely deliveries Communicate with suppliers to coordinate quotes and orders Work closely with Account Managers, Finance, Technical Support, and external partners to deliver excellent service Keep databases updated with customer and order details Support with other related administrative or service tasks as needed Requirements To excel in this role, you’ll need: - Fluent in both German (C2) and English (C1-C2), spoken and written At least 2 years of experience in customer service, customer success, administration or inside sales (B2B) Interested in IT/software industry Strong problem-solving skills and ability to learn quickly in a changing environment University degree or equivalent Highly organized, pro-active, detail-oriented, and good at multitasking Strong with numbers and comfortable working in a commercial environment Customer-focused mindset with excellent communication and relationship-building skills *Its a hybrid working arrangement with 1 day working from home every Friday Benefits Our client offers a direct contract (first contract will be 7 months) with a focus on long-term commitment, providing: Start date: ASAP A monthly salary ranging from € 3.000 to €3.700 gross, depending on your experience and education Monthly bonuses linked to performance paid monthly Holiday allowance. 25 vacation days. Reimbursement of travel costs up to €250 per month. Extensive training and ongoing support. Work hours from Monday to Friday, 9:00 AM to 5:30 PM, with 30mins lunch break. 4 days working onsite and 1 day working from home (Friday) A dynamic and lively work environment located in the heart of Amsterdam. Application Procedure If you are interested in this vacancy, you can apply by clicking on the button above. By clicking on apply, you agree to our privacy commitment and terms and conditions . Your application will be sent directly to the recruiter in charge. IMPORTANT: if you are not yet registered with Undutchables we kindly ask you to do so. Your information will be handled in the strictest confidence and your CV will not be sent to a company unless you have given prior permission. Curious about how the recruitment process works within Undutchables, click here to read more.

Over de vacature

Are you the CNC specialist with a 5-axis turning and milling background that will provide assistance to the Manufacturing Engineering Team and solves problems with a smile?

Please reach out, and become our next CNC Programmer - CAM Engineer at GKN-Fokker Landing Gear!

Over het bedrijf

Fokker Landing Gear, part of GKN Fokker, is a recognized specialist in landing gear and related systems. They focus on the design and development, production and assembly of complete landing gears, as well as the repair and reassembly of systems already in use. In doing so, they work on the most famous aircraft and helicopters; think of the Apache combat helicopter, the F-35 Lightning II (JSF), the Bombardier Dash 8 Q400 and the multipurpose NH90 maritime combat helicopter.

Over de functie

As a skilled and experienced CNC Programmer CAM Engineer you will be responsible for creating NC programs for multi-axis milling and mill-turn machines, as well as providing essential shop floor support to CNC machine operators. This role is critical in ensuring the efficient and precise manufacturing of landing gear parts, and you will play a key role in solving machining problems as they arise.

What you'll do

• Develop / optimize NC programs for multi-axis milling and mill-turn machines using advanced CAM software.
• Provide hands-on shop floor support to CNC operators, ensuring smooth and efficient operations.
• Troubleshoot and resolve machining issues on the shop floor to maintain production quality and efficiency.
• Work closely with other departments to ensure that machining processes meet the required specifications and standards.
• Continuously improve machining processes and contribute to the development of best practices within the department.
• Utilize root cause analysis, preventative and corrective action to reduce / eliminate non-conformances.
• Develop / improve standard operation procedures (SOP).

Wie ben jij?

• Bachelor's in engineering (e.g. Engineering, Manufacturing Technology).
• 5 Years' experience in a hard metal manufacturing and a passion for precision, multi-axis machining.
• Proficient in using CATIA V5. Experience with TopSolid, Siemens NX CAM, Vericut, CrashGuard, Tooltech and TDM is an advantage.
• Strong ability to read and interpret Siemens NC code and Heidenhain.
• Extensive experience with on-machine probing.
• Experience and knowledge with hard metals;
• Proven experience with deep-hole drilling, mill-turning and turning techniques.
• Solid background in operating and programming CNC machines, with a deep understanding of multi-axis milling and mill-turn operations. Problem-solving skills and the ability to work effectively in a fast-paced manufacturing environment.
• Good understanding of GD&T.
• Willingness to work flexible hours to support production activities.
• Excellent communication and teamwork skills to collaborate effectively with CNC operators and other team members.
• Are you a contractor? This opportunity could be very suitable for you as well!

What's in it for you

GKN-Fokker Landing Gear demonstrates passion for innovation and the employees are rightly proud for what they engineer and build. This is a truly challenging work environment: a role where you contribute as an individual but also as a member of a diverse and international team of experts. At GKN-Fokker Landing Gear, they not only provide you with the tools to perform at the best of your capabilities, but they also support and promote your technical and personal development.

Furthermore, they offer you:

• A gross monthly salary up to € 5500,- based on the CLA Metalektro and in line with your experience and qualifications
• At least one year contract via WFS PRO (including possible extension after the first year)
• 8% holiday allowance.
• 25 paid holidays for full-time employment,
• Working conditions according to the CAO Metalektro, including an excellent pension scheme (PME) and travel allowance,
• A pleasant and informal working environment, in which we work together to achieve the best result for our customers in a pleasant atmosphere.

Next to a competitive package, they will offer you a world of opportunities: they want to see your career fly! They will support your career progression by providing you with learning and development opportunities. That's the beauty of being part of a global business, once you're on board you never know where you career journey may take you!

Interesse?

WFS PRO is managing the recruitment process for this role. Apply now and join GKN-Fokker Landing Gear! The application process is carried out by WFS PRO. If you have questions, please contact Niels Kloostra at n.kloostra@wfspro.nl

Over de vacature

Are you the CNC specialist with a 5-axis turning and milling background that will provide assistance to the Manufacturing Engineering Team and solves problems with a smile?

Please reach out, and become our next CNC Programmer - CAM Engineer at GKN-Fokker Landing Gear!

Over het bedrijf

Fokker Landing Gear, part of GKN Fokker, is a recognized specialist in landing gear and related systems. They focus on the design and development, production and assembly of complete landing gears, as well as the repair and reassembly of systems already in use. In doing so, they work on the most famous aircraft and helicopters; think of the Apache combat helicopter, the F-35 Lightning II (JSF), the Bombardier Dash 8 Q400 and the multipurpose NH90 maritime combat helicopter.

Over de functie

As a skilled and experienced CNC Programmer CAM Engineer you will be responsible for creating NC programs for multi-axis milling and mill-turn machines, as well as providing essential shop floor support to CNC machine operators. This role is critical in ensuring the efficient and precise manufacturing of landing gear parts, and you will play a key role in solving machining problems as they arise.

What you'll do

• Develop / optimize NC programs for multi-axis milling and mill-turn machines using advanced CAM software.
• Provide hands-on shop floor support to CNC operators, ensuring smooth and efficient operations.
• Troubleshoot and resolve machining issues on the shop floor to maintain production quality and efficiency.
• Work closely with other departments to ensure that machining processes meet the required specifications and standards.
• Continuously improve machining processes and contribute to the development of best practices within the department.
• Utilize root cause analysis, preventative and corrective action to reduce / eliminate non-conformances.
• Develop / improve standard operation procedures (SOP).

Wie ben jij?

• Bachelor's in engineering (e.g. Engineering, Manufacturing Technology).
• 5 Years' experience in a hard metal manufacturing and a passion for precision, multi-axis machining.
• Proficient in using CATIA V5. Experience with TopSolid, Siemens NX CAM, Vericut, CrashGuard, Tooltech and TDM is an advantage.
• Strong ability to read and interpret Siemens NC code and Heidenhain.
• Extensive experience with on-machine probing.
• Experience and knowledge with hard metals;
• Proven experience with deep-hole drilling, mill-turning and turning techniques.
• Solid background in operating and programming CNC machines, with a deep understanding of multi-axis milling and mill-turn operations. Problem-solving skills and the ability to work effectively in a fast-paced manufacturing environment.
• Good understanding of GD&T.
• Willingness to work flexible hours to support production activities.
• Excellent communication and teamwork skills to collaborate effectively with CNC operators and other team members.
• Are you a contractor? This opportunity could be very suitable for you as well!

What's in it for you

GKN-Fokker Landing Gear demonstrates passion for innovation and the employees are rightly proud for what they engineer and build. This is a truly challenging work environment: a role where you contribute as an individual but also as a member of a diverse and international team of experts. At GKN-Fokker Landing Gear, they not only provide you with the tools to perform at the best of your capabilities, but they also support and promote your technical and personal development.

Furthermore, they offer you:

• A gross monthly salary up to € 5500,- based on the CLA Metalektro and in line with your experience and qualifications
• At least one year contract via WFS PRO (including possible extension after the first year)
• 8% holiday allowance.
• 25 paid holidays for full-time employment,
• Working conditions according to the CAO Metalektro, including an excellent pension scheme (PME) and travel allowance,
• A pleasant and informal working environment, in which we work together to achieve the best result for our customers in a pleasant atmosphere.

Next to a competitive package, they will offer you a world of opportunities: they want to see your career fly! They will support your career progression by providing you with learning and development opportunities. That's the beauty of being part of a global business, once you're on board you never know where you career journey may take you!

Interesse?

WFS PRO is managing the recruitment process for this role. Apply now and join GKN-Fokker Landing Gear! The application process is carried out by WFS PRO. If you have questions, please contact Niels Kloostra at n.kloostra@wfspro.nl

Over de vacature

Samenvatting Onze opdrachtgever is op zoek naar een gedreven Inspecteur die een cruciale bijdrage levert aan de veiligheid, kwaliteit en betrouwbaarheid van onze assets en systemen. In deze rol ben je verantwoordelijk voor het grondig inspecteren, controleren en laten onderhouden van technische installaties op de terminal. Je ziet erop toe dat alle apparatuur voldoet aan de strengste veiligheids- en kwaliteitsnormen en borgt dat alle werkzaamheden volgens relevante wet- en regelgeving worden uitgevoerd. Kom jij het team versterken? Functieomschrijving Jij staat midden in de operatie en bent hét aanspreekpunt bij afwijkingen aan onze assets. In een 24/7 omgeving neem je meldingen aan, registreer je ze en analyseer je verstoringen vanuit de operatie. Denk aan een AGV die niet rijdt of een kraan die stilvalt. Je zorgt dat meldingen snel bij de juiste afdeling terechtkomen en escaleert volgens onze Service Level Agreements (SLA’s) naar externe partijen als interne teams het incident niet kunnen oplossen. Heldere en tijdige communicatie over de status van verstoringen is daarbij cruciaal. Ook het monitoren van systemen is een kritisch onderdeel van jouw dagelijkse werk. Je werkt in een hecht team in de C-dienst (dag/avond). Ben jij de proactieve teamspeler die in een dynamische 24/7 omgeving snel schakelt? Solliciteer vandaag nog! Verantwoordelijkheden Registreert storingsmeldingen, voert een eerste analyse uit van de oorzaak en mogelijke oplossingen en bepaalt de prioriteit van het probleem; Draagt IT-gerelateerd meldingen over aan IT Eerstelijns Support en Technische zaken aan de (Lead) Engineers; Voorziet (Lead) Engineers van informatie uit registratiesysteem m.b.t. Tot de oplossing bij terugkerende storingen; Coördineert en bewaakt voortgang van opvolging van meldingen; Verstrekt werkvergunningen, registreert downtime, houdt administratie bij van gewerkte uren en geeft veiligheidsinstructies; Verhelpt eenvoudige technische verstoringen met behulp van een Remote Control Desk en geeft terugkoppeling aan afdeling Operations. Wat bieden wij Aanbod: Wij bieden je een unieke ervaring op de meest efficiënte, duurzame en innovatieve containerterminal ter wereld. De arbeidsvoorwaarden worden door onze medewerkers als goed en marktconform ervaren. Voor de functie Technical Inspector bestaan deze arbeidsvoorwaarden onder andere uit: Een salaris van max €6.800,- per maand op basis van 38,75 uur per week; 8% vakantiegeld en 28 vakantiedagen; 65 ADV uren; Variabele prestatiebonus en winstuitkering; Max €225,- reiskostenvergoeding; Pensioenregeling; Bijdrage in ziektekosten. Functie-eisen Functie-eisen Mbo-niveau 4 werk- en denkniveau, bij voorkeur in een technische richting zoals elektrotechniek, mechanica of hydrauliek; Minimaal enkele jaren relevante werkervaring in een vergelijkbare functie; Grondige kennis van wet- en regelgeving, waaronder NEN-normen, veiligheidsvoorschriften en Arbowetgeving; Analytisch sterk, met een scherp oog voor technische problemen en veiligheidsrisico's; Ervaring met inspectiesoftware, rapportagetools, en bekendheid met EAM-systemen zoals Maximo; Fysiek in staat om werkzaamheden uit te voeren in uitdagende omgevingen; Bereidwillig is om, indien benodigd, in een dag-avond ploeg inclusief de weekenden te werken; Je beschikt over een rijbewijs en eigen vervoer. Enthousiast geworden? Zie jij jezelf al aan de slag gaan in deze rol? Druk dan direct op de sollicitatieknop hieronder en we nemen zo snel mogelijk contact met je op!

Over de vacature

Vacaturebeschrijving IntroLooking for a hands-on job in Utrecht? Join as a Machine Woodworker and earn from €16 gross per hour! Work with wood, learn new skills, and grow in a friendly team.Dit ga je doen Join our team as a Machine Woodworker in Utrecht! What will you do? Operate saw machines to cut wooden boards, beams, planks, and heavy-duty cardboard Work from specific customer orders - every day is different Use a pallet truck to collect and position materials Cut materials following exact measurements; precision matters Move finished pieces to the assembly area for your colleagues A typical day: Teamwork with 19 colleagues in the workshop (over 35 in the company) Friendly, supportive environment Use tools like lift tables, overhead cranes, and vacuum lifts to make tasks easier Full guidance and training provided so you use machines safely Basic English language skills are enough - you only need to understand simple instructions and communicate at work Why apply? Develop your technical skills - learn to use modern machines Be part of a team where everyone helps each other Enjoy a positive, safe, and well-organized workplace We support your growth and success Dit breng je mee - Experience as a machine woodworker, in construction, or you are just handy Precision and attention to detail Forklift certificate is a plus, not a must Physically able to do heavier work Basic English skills: you understand simple instructions and can communicate at work Hier kom je terecht We are active in the packaging industry, creating custom wooden packaging and flooring for different clients. Our production site is modern and well-equipped, focusing on safety and efficiency. You'll work in a team that values respect, collaboration, and personal development. We invest in our employees with training and a welcoming work environment. Dit krijg je A gross hourly wage of €16; paid weekly Free transportation to work by car or traditional bicycle. In the case of an electric bicycle, the cost is €6/week; SNF-certified company accommodation at €119 per week (double rooms) and health insurance at €39.35 per week Support from a coordinator and access to the employee portal (contracts, documents, payslips, annual earnings statements, etc.) Opportunities for growth - language courses and professional training, including job-specific courses Hoe nu verder? Questions? Contact Iulia at iene@abmiddennederland.nl. We look forward to your application! Salarisomschrijving 16 - 17 Over de werkgever We are active in the packaging industry, creating custom wooden packaging and flooring for different clients. Our production site is modern and well-equipped, focusing on safety and efficiency. You'll work in a team that values respect, collaboration, and personal development. We invest in our employees with training and a welcoming work environment.

Over de vacature

Wat je gaat doen As a packaging operator, you play an important role in ensuring the smooth operation of production processes in our modern confectionery factory in Breda. You make sure the production lines are set up correctly, monitor the process, and intervene in case of minor malfunctions. With your technical insight and accuracy, you contribute to an efficient and safe working environment.You will also have the opportunity to further develop your technical skills and actively contribute ideas for process improvements. What you will do: - Set up and operate the production lines according to the correct specifications. Monitor the production process and carry out quality checks. Resolve minor technical issues and prevent downtime by replenishing materials in a timely manner. Contribute to process optimization and production improvements. Work in a three-shift system (morning, afternoon, and night) with an active and varied workday. Wat we je bieden With us, you’ll gain more than just a job — you’ll have the opportunity to develop yourself in a modern working environment. We offer attractive employment conditions and support your growth, both professionally and personally. - Salary between €3,500 and €3,700 per month. Temporary contract with the prospect of a permanent position. Full-time role in a three-shift system. 25 vacation days and 8% holiday allowance. Travel allowance of €0.23 per kilometer. Internal training programs and career advancement opportunities to become an Allround Packaging Operator. At Start People, we operate on the principle of equal pay; your terms and conditions of employment always match those of colleagues who are employed directly by the client. This means that, in addition to your hourly rate, your terms and conditions of employment also include, for example, the number of days off, allowances, time-off-in-lieu payments and other pay components. Functie-eisen We are looking for an enthusiastic operator who enjoys working with technology and wants to further develop in a dynamic production environment. - Experience as an operator, preferably as a packaging operator. Interest in the packaging process and ready for the next step in your career. Accurate, technically minded, and physically active. Available full-time in a three-shift system. Proficient in Dutch and/or English. Own transport to come to the work. Over het bedrijf Globally known for candy brands such as Klene, Fruittella, and of course Mentos, produced in Breda. New colleagues receive thorough onboarding and guidance from experienced operators. For the right candidate, there is the possibility of a permanent position. The Breda location is easily accessible by bike and car.

Over de vacature

Vacaturebeschrijving IntroJoin as a Food Machine Operator in Lopik! Work with modern cheese production lines, earn €16.92-€24.26 gross per hour, and build your career in a friendly environment.Dit ga je doen Are you looking for a new step in food production and do you have experience as a machine operator? In Lopik, you will work as a Food Machine Operator with a focus on cheese production. Your main job is to operate, monitor, and optimize modern production lines that make smoked and processed cheeses for customers around the world. You make sure every product meets the highest standards for quality and food safety, and you help your team keep the process running smoothly. On a typical day, you will set and adjust technical parameters like temperature, pressure, and mixing times, making sure each batch is perfect. You check critical control points (HACCP), solve mechanical and process issues, and support less experienced operators with your knowledge. The work is a mix of hands-on technical tasks and teamwork - you are a key link between production, quality, and technical departments. You will work in shifts, so flexibility is important. Basic English skills (A2-B1) are enough for this job - you just need to understand instructions and communicate with your team. Why apply? You will join a stable company with modern equipment and a friendly work environment. Here, you can grow your skills, follow trainings, and build a real career in food technology. Your work is valued, and you will be part of a company that cares for quality, safety, and the future. Dit breng je mee - Experience as a process or machine operator in the food industry (dairy or cheese is a plus) MBO-3 or MBO-4 diploma in Process Technology, Food Technology, Mechanical Engineering, or similar Good understanding of production processes and basic automation Knowledge of HACCP and food safety standards Flexible to work in shifts and take responsibility for your area Basic English skills (A2-B1) are sufficient - you need to understand simple instructions and communicate with your colleagues at work. Hier kom je terecht This is a well-established company in the food sector, specializing in the production and processing of cheese. The work environment is modern, safe, and focused on teamwork and ongoing improvement. Sustainability and innovation are important values, and employees are encouraged to develop their skills and contribute to better processes every day. You will be part of an international team where everyone is respected and supported. Dit krijg je A gross hourly wage of 16.92-24.26; paid weekly Free transportation to work by car or traditional bicycle. In the case of an electric bicycle, the cost is €6/week;SNF-certified company accommodation at €119 per week (double rooms) and health insurance at €39.35 per week Support from a coordinator and access to the employee portal (contracts, documents, payslips, annual earnings statements, etc.) Opportunities for growth - language courses and professional training, including job-specific courses Hoe nu verder? For more information or to apply, contact iene@mail.abmiddennederland.nl Salarisomschrijving 16.92 - 24.26 Over de werkgever This is a well-established company in the food sector, specializing in the production and processing of cheese. The work environment is modern, safe, and focused on teamwork and ongoing improvement. Sustainability and innovation are important values, and employees are encouraged to develop their skills and contribute to better processes every day. You will be part of an international team where everyone is respected and supported.

Over de vacature

Our client is looking for a fulltime Account Coordinator German speaking. You will work with DACH team in the Customer Service Department. You are part of the European Sales office and will work in Amsterdam. Responsibilities: - Managing daily customer enquiries, order processing & invoicing, sample and trial orders Following up on lead-time quotations, pricing quotations trials & sample deliveries Providing internal sales support Handling requests for call-offs in order to enable delivery, stock level maintenance and timely ordering of new stock Contributing to the analysis and chasing of customer payments You will work closely with other departments (Sales, Technical Service, Production, Transport Planning) to formulate potential solutions to customer questions The ideal candidate always puts the customer first and maintains excellent service standards even in difficult situations. They appreciate your input and creativity when it comes to problem solving. # Requirements *German C1/C2 level and fluent in English Bachelor’s degree or the equivalent in relevant work experience - Previous experience with B2B customer supporting or operational positions Excellent communication skills, both verbal and written Hard-working and action oriented Interested in inside sales Attentive, flexible, receptive to change and the ability to adapt quickly Multi-task, stress resistant, attentive to details and analytical Advanced Excel and other IT skills are a plus Benefits The Amsterdam office offers an informal, international and challenging work environment. - Start date as soon as possible Full time position Competitive salary package with 25 vacation days + 13 ATV days Sport allowance Commuting allowance - fully onsite Learning and development opportunities Application Procedure If you are interested in this vacancy, you can apply by clicking on the button above. By clicking on apply, you agree to our privacy commitment and terms and conditions . Your application will be sent directly to the recruiter in charge. IMPORTANT: if you are not yet registered with Undutchables we kindly ask you to do so. Your information will be handled in the strictest confidence and your CV will not be sent to a company unless you have given prior permission. Curious about how the recruitment process works within Undutchables, click here to read more.

Over de vacature

B1.3 Licensed Engineers wanted (location: Woensdrecht - The Netherlands)

“Aviation is what we breathe. It's our past, present, and future." Are you ready to join an innovative, specialized team with global impact?

Over het bedrijf

Fokker Techniek specializes in MRO (Maintenance, Repair, and Overhaul) services, handling everything from minor repairs to extensive inspections under EASA's Design Organisation Approval (DOA). Fokker Techniek can manage the complete design and development process in-house, including certification and flight testing. With a focus on quality and innovation, Fokker is a leader in aviation maintenance and technology.

Over de functie

As a Licensed B1.3 Engineer, you'll take on a critical role in maintaining and inspecting military helicopter systems and engines, ensuring compliance with MAA-NLD regulations. Working with an expert team (both civil and military members), you'll be hands-on in assembly, disassembly, and in-depth fault analysis. From minor modifications up to heavy maintenance! Together with your colleagues you are responsible for releasing military helicopter back into service, and in this process, you will supervise less experienced engineers.

Wie ben jij?

• Hold an EASA AML B1.3 (civil) and/or you have extensive NH90 experience
• Able to perform base maintenance checks
• Have a comprehensive logbook with documented experience.
• Strong in technical English communication.
• Solution-oriented, with effective team collaboration skills.
• Detail-oriented with a commitment to safety and quality standards.
• You are keen to enter into a long employment relationship where you can develop as a professional. To be clear: this role is therefore not a contractor opportunity.

What's in it for you

• Competitive Salary: Earn between €4300 and €4500 per month, based on your type ratings and experience. Note: we are fully transparent in what you will earn, so there are no unexpected surprises. We indicate exactly what you will have left in your pocket each month to spend freely after all expenses.
• Path to Permanent Employment: Start with a one-year contract at WFS PRO, with the potential for a permanent role at Fokker Techniek.
• Professional Development: Gain access to training and support tailored to enhance your skills and accelerate your career. We also introduce you to the Dutch language through an online language course, sponsored by WFS PRO.
• Relocation assistance, allowance and housing: We give you clear insight to the relocation process and ensure a smooth transition to the Netherlands. We'll also help arrange your accommodation, making your move seamless. On top of that, you get a relocation allowance of up to € 2500 (single) or up to € 5000 (families) for moving to the Netherlands.
• Tax Benefits: Receive tax breaks or other financial benefits for the first 5 years.
• Additional Financial Benefits: You get a travel allowance for car and bike: €0,23 per kilometer (from 10km), an 8% holiday allowance, also, your salary increases each year (CLA increase and performance bonus) and you have the possibility to convert ADV-days in additional income (up to 2% up to gross salary).
• Discounted or Free options: You get access to fitness facilities at a reduced rate and free access to GoodHabitz, with more than 1000 lessons to improve yourself.

Interesse?

Want to take flight in your career with us? Reach out to Niels Kloostra via n.kloostra@wfspro.nl for more information. When applying, please add your resume, full AML and logbook.

Over de vacature

B1.3 Licensed Engineers wanted (location: Woensdrecht - The Netherlands)

“Aviation is what we breathe. It's our past, present, and future." Are you ready to join an innovative, specialized team with global impact?

Over het bedrijf

Fokker Techniek specializes in MRO (Maintenance, Repair, and Overhaul) services, handling everything from minor repairs to extensive inspections under EASA's Design Organisation Approval (DOA). Fokker Techniek can manage the complete design and development process in-house, including certification and flight testing. With a focus on quality and innovation, Fokker is a leader in aviation maintenance and technology.

Over de functie

As a Licensed B1.3 Engineer, you'll take on a critical role in maintaining and inspecting military helicopter systems and engines, ensuring compliance with MAA-NLD regulations. Working with an expert team (both civil and military members), you'll be hands-on in assembly, disassembly, and in-depth fault analysis. From minor modifications up to heavy maintenance! Together with your colleagues you are responsible for releasing military helicopter back into service, and in this process, you will supervise less experienced engineers.

Wie ben jij?

• Hold an EASA AML B1.3 (civil) and/or you have extensive NH90 experience
• Able to perform base maintenance checks
• Have a comprehensive logbook with documented experience.
• Strong in technical English communication.
• Solution-oriented, with effective team collaboration skills.
• Detail-oriented with a commitment to safety and quality standards.
• You are keen to enter into a long employment relationship where you can develop as a professional. To be clear: this role is therefore not a contractor opportunity.

What's in it for you

• Competitive Salary: Earn between €4300 and €4500 per month, based on your type ratings and experience. Note: we are fully transparent in what you will earn, so there are no unexpected surprises. We indicate exactly what you will have left in your pocket each month to spend freely after all expenses.
• Path to Permanent Employment: Start with a one-year contract at WFS PRO, with the potential for a permanent role at Fokker Techniek.
• Professional Development: Gain access to training and support tailored to enhance your skills and accelerate your career. We also introduce you to the Dutch language through an online language course, sponsored by WFS PRO.
• Relocation assistance, allowance and housing: We give you clear insight to the relocation process and ensure a smooth transition to the Netherlands. We'll also help arrange your accommodation, making your move seamless. On top of that, you get a relocation allowance of up to € 2500 (single) or up to € 5000 (families) for moving to the Netherlands.
• Tax Benefits: Receive tax breaks or other financial benefits for the first 5 years.
• Additional Financial Benefits: You get a travel allowance for car and bike: €0,23 per kilometer (from 10km), an 8% holiday allowance, also, your salary increases each year (CLA increase and performance bonus) and you have the possibility to convert ADV-days in additional income (up to 2% up to gross salary).
• Discounted or Free options: You get access to fitness facilities at a reduced rate and free access to GoodHabitz, with more than 1000 lessons to improve yourself.

Interesse?

Want to take flight in your career with us? Reach out to Niels Kloostra via n.kloostra@wfspro.nl for more information. When applying, please add your resume, full AML and logbook.

Over de vacature

For an innovative company in Boxtel, we are immediately looking for an experienced CNC Press Brake Operator (CNC Kanter). Are you someone who can operate and program CNC press brakes almost effortlessly through years of experience? Do you enjoy precision work, technical challenges, and taking full responsibility for your own production quality? Then this could be the perfect long-term opportunity for you.

In this position, you will independently produce high-quality sheet metal parts and complex constructions based on technical drawings and specifications. You will work with advanced CNC press brake machines in a professional production environment where craftsmanship, responsibility, and reliability are highly valued.

You will join a stable and modern organization where quality comes first and where experienced professionals are appreciated for their expertise and commitment.

What will you do?

• Independently setting up, operating, and programming CNC press brake machines
• Reading and interpreting technical drawings and work instructions
• Selecting the correct tools and determining bending sequences
• Producing complex sheet metal products with high precision
• Performing quality checks and measurements during production
• Correcting deviations and optimizing the bending process
• Working independently and taking responsibility for your own work
• Maintaining a clean, safe, and organized workplace
• Collaborating professionally with colleagues in production and engineering

✅ What do you bring?

• Extensive experience as a CNC Press Brake Operator / CNC Kanter
• You fully understand bending techniques, materials, and machine settings
• Experience with complex and custom-made metal constructions
• Ability to work completely independently from technical drawings
• Strong technical insight and a very high level of accuracy
• You are reliable, serious, and looking for a long-term collaboration
• Minimum of 1 professional reference is required
• Driving license B is mandatory
• English language skills at minimum B1 level
• A motivated, responsible, and hands-on working attitude
• Flexible, collegial, and quality-oriented mindset

What do we offer you?

• A competitive salary with good secondary employment conditions
• Working in a modern environment with professional tools and equipment
• A team that shares a true passion for technology and craftsmanship
• Opportunities for both project-based work and long-term cooperation
• 24/7 availability and personal guidance
• We value you both as a person and as a skilled professional, and together we look for a job with a future
• Support with transportation and accommodation if needed

Over de vacature

Voor ons klant zijn wij op zoek naar een fulltime Elektromonteur. Als Elektromonteur kom je te werken in een team die graag samen werkt. Bij onze klant heerst een prettige no-nonsens werksfeer. Heb je (nog) niet de opleiding maar wel relevante werkervaring en affiniteit met techniek dan is deze vacature ook zeker interessant!

Werkzaamheden

• Installeren en aansluiten zekeringkast
• Installeren en aansluiten dashboard
• Installeren van elektronische installaties zoals verlichting, omroep installatie, ringleidingen etc.
• Monteren en aansluiten van elektrocomponenten zoals omvormers, accu’s etc.

Functie-eisen

• Je hebt een technische opleiding (voorkeur elektronische installaties) afgerond of wilt deze volgen
• Je bent bereid om aanvullende cursussen zoals automotive remsystemen
• Je werkt graag samen in een groep aan een project

Aanbod

Als Elektromonteur kom je in aanmerking voor een marktconform salaris met goede secundaire arbeidsvoorwaarden. Wij delen de passie voor techniek en een informele werksfeer. Daarnaast bieden wij jou als werknemer nog meer zoals:

• Wij kijken naar jou als mens en medewerker. Dat is ons startpunt voor het zoeken naar een passende baan met toekomst
• Wij zijn 24 uur per dag bereikbaar zodat we zo goed mogelijk kunnen ondersteunen
• Wij bieden jou werk op projectbasis maar ook voor lange termijn

Heb je interesse? Solliciteer via de knop of neem telefonisch contact op met een van onze medewerkers +31 6 - 27443159

-----------------------------------------------------------------------------------------------------------------------------------------------------

For our client, we are looking for a full-time Electrical Mechanic. As an Electrical Mechanic, you will join a team that values collaboration. Our client fosters a pleasant, no-nonsense work environment. If you don’t have formal education but have relevant work experience and a passion for technology, this vacancy is definitely worth considering!

Responsibilities

• Installing and connecting fuse boxes.
• Installing and connecting dashboards.
• Installing electronic systems such as lighting, PA systems, loop wiring, etc.
• Assembling and connecting electrical components like inverters, batteries, and more.

Requirements

• You have completed a technical education (preferably in electrical installations) or are willing to pursue one.
• You are open to additional training, such as automotive braking systems.
• You enjoy working collaboratively on group projects.

What We Offer
As an Electrical Mechanic, you will receive a competitive salary with excellent secondary benefits. We share a passion for technology and maintain an informal work atmosphere. Additionally, we offer:

• A focus on you as both a person and employee. This is our starting point for finding a suitable job with future prospects.
• 24/7 support to assist you in the best possible way.
• Opportunities for both project-based and long-term employment.

Are you interested? Apply via the button or contact one of our staff members by phone at +31 6 - 27443159.