Assembly engineer Vacatures

Over de vacature

Jij bouwt techniek die levens redt. En dat levert je tot €3.700 bruto per maand op.

Je nieuwe baan

Wat ga je allemaal doen?

• Assembleren van technische onderdelen en systemen
• Werken vanaf tekeningen en instructies
• Controleren of alles klopt en werkt
• Meedenken over hoe het slimmer kan

Je bouwt geen standaard product. Elk project is anders.

Over het bedrijf

Een korte introductie

Je gaat aan de slag bij een internationale specialist in brandweertechniek. Hier worden voertuigen en systemen gebouwd die wereldwijd worden ingezet bij noodsituaties.

De locatie in Winschoten is modern en praktisch ingericht. Op de assemblageafdeling werk je in een vast team. Iedereen weet wat ‘ie doet. Je helpt elkaar en levert samen een eindproduct waar je trots op bent. Wat we jou bieden

Naast persoonlijk contact

• €3.000 – €3.700 bruto per maand
• Werken in dagdienst
• Uitzicht op vast contract
• Doorgroeimogelijkheden binnen de organisatie naar productieleider
• Afwisselend werk: geen dag hetzelfde product en werk waar je echt resultaat van ziet

Jouw kwaliteiten

Waar we naar op zoek zijn

• Je bent handig met gereedschap
• Ervaring met sleutelen of techniek
• Tekening lezen is mooi meegenomen. Nog niet? Dan leer je het hier gewoon.

Over de vacature

Wat je gaat doen

As an EIM Test Technician, you will work on high-quality technical modules used in the high-tech industry. You are responsible for testing and checking these modules before they are delivered to the customer. You will connect the module to dedicated test equipment, perform various functional tests and verify that all mechanical, pneumatic and electrical components operate correctly.

Your responsibilities:

• Testing and qualifying EIM modules using advanced test equipment;
• Connecting modules to test setups and checking all connections;
• Performing functional tests on mechanical, pneumatic and electrical components;
• Checking valves, sensors, actuators, pressure and gas flow;
• Reading and interpreting technical drawings, schematics, work instructions and test procedures;
• Operating automated test programs and evaluating test results;
• Identifying and analysing deviations and technical faults;
• Performing minor technical corrections or adjustments where required;
• Recording and processing test and measurement results.

Wat we je bieden

You will work in an innovative and professional high-tech environment where your technical knowledge and practical skills are valued. You will work with complex products used in a technically demanding environment and have plenty of opportunities to further develop your skills.
You can expect: - A gross monthly salary between €3,950 and €4,150, including shift allowance;

• A full-time position working in a 2-shift system:
  • 06:00 – 14:30;
  • 14:30 – 23:00;
• The prospect of a permanent contract;
• 25 vacation days;
• 8% holiday allowance;
• €0.25 per kilometre travel allowance;
• Working with modern test and measurement equipment;
• A professional, clean and innovative working environment;
• Plenty of opportunities to further develop your technical skills.

Functie-eisen

We are looking for a practically minded technician who enjoys working hands-on while also wanting to understand how a technical system works. You do not need previous EIM experience: technical understanding and a solid foundation in mechanical and electrical engineering are more important.
Ideally, you have: - A completed technical MBO-level education, for example in Mechatronics, Electrical Engineering, Mechanical Engineering or a similar field;

• Knowledge of mechanical engineering, assembly and/or electrical engineering;
• The ability to read and understand technical drawings and basic electrical or pneumatic schematics;
• Experience assembling, connecting, testing or maintaining technical systems is an advantage;
• Strong technical understanding and an interest in analysing faults and deviations;
• A precise and structured way of working;
• Full-time availability and willingness to work in a 2-shift system;
• Good command of English;
• Your own accomodation an transport.

Over het bedrijf

You will join an internationally operating high-tech organisation in the Nijmegen region that develops, builds, tests and qualifies advanced technical modules and systems. The organisation develops solutions for the transport and control of high-purity gases and liquids in demanding high-tech environments.

Within this modern production environment, mechanical engineering, electrical engineering, pneumatics and precision engineering come together. You will work on products where quality and reliability are essential and where the technology is used in industries including semiconductors, aerospace, pharmaceuticals and other high-tech sectors.

The location is easily accessible from Arnhem, Oss, Tiel and the German border region, including Kleve and Goch.

Over de vacature

Wat je gaat doen

As an EIM Test Technician, you will work on high-quality technical modules used in the high-tech industry. You are responsible for testing and checking these modules before they are delivered to the customer. You will connect the module to dedicated test equipment, perform various functional tests and verify that all mechanical, pneumatic and electrical components operate correctly.

Your responsibilities:

• Testing and qualifying EIM modules using advanced test equipment;
• Connecting modules to test setups and checking all connections;
• Performing functional tests on mechanical, pneumatic and electrical components;
• Checking valves, sensors, actuators, pressure and gas flow;
• Reading and interpreting technical drawings, schematics, work instructions and test procedures;
• Operating automated test programs and evaluating test results;
• Identifying and analysing deviations and technical faults;
• Performing minor technical corrections or adjustments where required;
• Recording and processing test and measurement results.

Wat we je bieden

You will work in an innovative and professional high-tech environment where your technical knowledge and practical skills are valued. You will work with complex products used in a technically demanding environment and have plenty of opportunities to further develop your skills.
You can expect: - A gross monthly salary between €3,950 and €4,150, including shift allowance;

• A full-time position working in a 2-shift system:
  • 06:00 – 14:30;
  • 14:30 – 23:00;
• The prospect of a permanent contract;
• 25 vacation days;
• 8% holiday allowance;
• €0.25 per kilometre travel allowance;
• Working with modern test and measurement equipment;
• A professional, clean and innovative working environment;
• Plenty of opportunities to further develop your technical skills.

Functie-eisen

We are looking for a practically minded technician who enjoys working hands-on while also wanting to understand how a technical system works. You do not need previous EIM experience: technical understanding and a solid foundation in mechanical and electrical engineering are more important.
Ideally, you have: - A completed technical MBO-level education, for example in Mechatronics, Electrical Engineering, Mechanical Engineering or a similar field;

• Knowledge of mechanical engineering, assembly and/or electrical engineering;
• The ability to read and understand technical drawings and basic electrical or pneumatic schematics;
• Experience assembling, connecting, testing or maintaining technical systems is an advantage;
• Strong technical understanding and an interest in analysing faults and deviations;
• A precise and structured way of working;
• Full-time availability and willingness to work in a 2-shift system;
• Good command of English;
• Your own accomodation an transport.

Over het bedrijf

You will join an internationally operating high-tech organisation in the Nijmegen region that develops, builds, tests and qualifies advanced technical modules and systems. The organisation develops solutions for the transport and control of high-purity gases and liquids in demanding high-tech environments.

Within this modern production environment, mechanical engineering, electrical engineering, pneumatics and precision engineering come together. You will work on products where quality and reliability are essential and where the technology is used in industries including semiconductors, aerospace, pharmaceuticals and other high-tech sectors.

The location is easily accessible from Arnhem, Oss, Tiel and the German border region, including Kleve and Goch.

Over de vacature

Wat je gaat doen

As an EIM Test Technician, you will work on high-quality technical modules used in the high-tech industry. You are responsible for testing and checking these modules before they are delivered to the customer. You will connect the module to dedicated test equipment, perform various functional tests and verify that all mechanical, pneumatic and electrical components operate correctly.

Your responsibilities:

• Testing and qualifying EIM modules using advanced test equipment;
• Connecting modules to test setups and checking all connections;
• Performing functional tests on mechanical, pneumatic and electrical components;
• Checking valves, sensors, actuators, pressure and gas flow;
• Reading and interpreting technical drawings, schematics, work instructions and test procedures;
• Operating automated test programs and evaluating test results;
• Identifying and analysing deviations and technical faults;
• Performing minor technical corrections or adjustments where required;
• Recording and processing test and measurement results.

Wat we je bieden

You will work in an innovative and professional high-tech environment where your technical knowledge and practical skills are valued. You will work with complex products used in a technically demanding environment and have plenty of opportunities to further develop your skills.
You can expect: - A gross monthly salary between €3,950 and €4,150, including shift allowance;

• A full-time position working in a 2-shift system:
  • 06:00 – 14:30;
  • 14:30 – 23:00;
• The prospect of a permanent contract;
• 25 vacation days;
• 8% holiday allowance;
• €0.25 per kilometre travel allowance;
• Working with modern test and measurement equipment;
• A professional, clean and innovative working environment;
• Plenty of opportunities to further develop your technical skills.

Functie-eisen

We are looking for a practically minded technician who enjoys working hands-on while also wanting to understand how a technical system works. You do not need previous EIM experience: technical understanding and a solid foundation in mechanical and electrical engineering are more important.
Ideally, you have: - A completed technical MBO-level education, for example in Mechatronics, Electrical Engineering, Mechanical Engineering or a similar field;

• Knowledge of mechanical engineering, assembly and/or electrical engineering;
• The ability to read and understand technical drawings and basic electrical or pneumatic schematics;
• Experience assembling, connecting, testing or maintaining technical systems is an advantage;
• Strong technical understanding and an interest in analysing faults and deviations;
• A precise and structured way of working;
• Full-time availability and willingness to work in a 2-shift system;
• Good command of English;
• Your own accomodation an transport.

Over het bedrijf

You will join an internationally operating high-tech organisation in the Nijmegen region that develops, builds, tests and qualifies advanced technical modules and systems. The organisation develops solutions for the transport and control of high-purity gases and liquids in demanding high-tech environments.

Within this modern production environment, mechanical engineering, electrical engineering, pneumatics and precision engineering come together. You will work on products where quality and reliability are essential and where the technology is used in industries including semiconductors, aerospace, pharmaceuticals and other high-tech sectors.

The location is easily accessible from Arnhem, Oss, Tiel and the German border region, including Kleve and Goch.

Over de vacature

Are you an experienced CNC Milling Operator who enjoys machining large, complex components? Then this is an excellent opportunity to join a high-tech manufacturer where precision and craftsmanship are at the heart of everything they do. You'll work with modern CNC machines on customer-specific products for industries such as semiconductors, optics and energy. No repetitive production work—every project brings a new technical challenge.

Organisatie

Our client is a leading high-tech supplier specialising in machining, welding, vacuum technology, engineering and assembly. The company manufactures complex machine frames, mechatronic modules and precision components for the semiconductor, optical and energy industries. You'll become part of a modern production environment where innovation, quality and continuous improvement are part of everyday work..

Functie

• Machine large and complex components on modern CNC milling machines
• Independently set up, operate and adjust CNC machines
• Read and interpret technical drawings and fixture plans
• Select, replace and maintain cutting tools
• Work with Fanuc, Heidenhain or Siemens controls
• Inspect finished parts and ensure they meet strict quality standards
• Produce small batches with a high level of accuracy
• Contribute to continuous improvements within the machining department

Functie-eisen

• MBO-level education or equivalent technical working and thinking level
• Proven experience as a CNC Milling Operator
• Experience with 5-axis CNC milling machines
• Experience with at least one of the following control systems: Fanuc, Heidenhain or Siemens
• Able to read technical drawings and fixture plans
• Good command of the English language
• Willing to work in a 3 to 5-shift rotation
• Accurate, quality-driven and able to work independently

Aanbod

• A gross monthly salary between €3,200 and €5,400, depending on your experience
• Minimum 28% shift allowance, with the potential for higher shift premiums depending on the shift schedule
• The opportunity to secure a permanent contract after an initial secondment period
• 27 vacation days and 13 additional ADV days per year
• Travel allowance
• Plenty of opportunities for training, personal development and career progression
• Work in a growing high-tech manufacturing environment with state-of-the-art machinery

Solliciteren

Are you the CNC Milling Operator we're looking for, or would you like to learn more about this opportunity? Apply today using the button below. If you have any questions, feel free to contact Dustean on +31 6 1984 1117 or via d.youngs@peoplewithskills.com. We look forward to hearing from you!

Over de vacature

Wat je gaat doen

As a Quality Control Technician, you are an important link between production and the final product. You make sure that customers receive high-quality products they can rely on.

Your responsibilities include:

• Inspecting components and assembled products before shipment;
• Performing dimensional inspections using technical drawings and specifications;
• Measuring products with calipers, micrometers and other precision measuring equipment;
• Identifying deviations and documenting non-conformities;
• Preparing inspection reports and quality documentation;
• Releasing products that fully meet the required quality standards;
• Working closely with production and assembly teams to resolve quality issues;
• Contributing ideas to improve inspection and manufacturing processes.

This is a hands-on technical position on the production floor of a high-tech company and not a laboratory role.

Wat we je bieden

You will work in a modern cleanroom environment where precision and quality are essential. In return for your technical expertise and commitment, you can expect: - Gross monthly salary between €3,850 and €4,064, including shift allowance;

• 25 vacation days and 8% holiday allowance;
• €0.25 net travel allowance per kilometer;
• Prospects of a permanent contract;
• Thorough onboarding by experienced colleagues;
• Training and opportunities to grow within quality and manufacturing;
• A modern cleanroom workplace with advanced production technology;
• An informal working atmosphere where teamwork and quality come first.

Functie-eisen

You are accurate, structured and take pride in delivering quality. You enjoy working with technical drawings, precision measuring equipment and solving quality issues. You are comfortable working in a structured manufacturing environment and understand the importance of accuracy. You also have: - A completed technical education, such as Mechanical Engineering, Mechatronics, Precision Engineering, Production Technology or a similar qualification;

• Experience within technical manufacturing, assembly or high-tech production;
• Experience reading technical drawings;
• Experience with precision measuring equipment;
• A structured and detail-oriented working style;
• Availability to work full-time in a two-shift schedule:
  • 06:00–14:30
  • 14:30–23:00
• Good English communication skills;
• Basic MS Office skills;
• Your own accommodation and transport.

Over het bedrijf

You will join an international high-tech manufacturer in the Nijmegen area, specialising in precision technology and advanced industrial systems. Highly complex components and assemblies are produced every day in a cleanroom environment where accuracy, reliability and quality are essential.The company has an informal and collaborative culture and invests in the development of its employees. You will work with experienced colleagues, receive proper onboarding and have opportunities to develop further within quality and manufacturing. The work location in the Nijmegen area is easily accessible by car from cities such as Arnhem, Boxmeer and Tiel, as well as from the German border area, including Kleve and Goch. Are you ready to use your technical knowledge and precision skills in a high-tech production environment? Then we would like to hear from you.

Over de vacature

Wat je gaat doen

As a Quality controller, you are responsible for checking whether components and assembled products meet the required quality standards.

Your work includes:

• Inspecting components and assembled products before shipment;
• Performing dimensional inspections based on technical drawings and specifications;
• Measuring products using calipers, micrometers and other precision measuring equipment;
• Identifying deviations and documenting non-conformities;
• Preparing inspection reports and other quality documentation;
• Releasing products that fully meet the required quality standards;
• Working closely with production and assembly teams to identify and resolve quality issues;
• Contributing ideas to improve inspection and manufacturing processes.

This is a hands-on technical position on the production floor of a high-tech company, not a laboratory role.

Wat we je bieden

You will work in a modern technical environment where quality and development are taken seriously. In return for your knowledge and commitment. You can expect: - A gross monthly salary between €3.850 and €4.064, including shift allowance;

• 25 vacation days and 8% holiday allowance;
• €0,25 net travel allowance per kilometre;
• Prospects of a permanent contract;
• Thorough onboarding supported by experienced colleagues;
• Training and opportunities to develop further within quality and manufacturing;
• A modern cleanroom workplace with advanced production technology;
• An informal working atmosphere where teamwork and quality come first.

Functie-eisen

You enjoy working accurately and take pride in delivering high-quality work. You understand technical drawings, like solving quality issues and feel comfortable working in a structured technical manufacturing environment.You also have: - A completed technical education, for example in Mechanical Engineering, Mechatronics, Precision Engineering, Production Technology or a similar field;

• Experience within technical manufacturing, assembly or high-tech production;
• Experience reading and understanding technical drawings;
• Experience working with precision measuring equipment;
• A structured and detail-oriented approach to your work;
• Full-time availability and willingness to work in a two-shift schedule:
  • 06:00–14:30
  • 14:30–23:00
• Good English communication skills;
• Basic MS Office skills;
• Your own accommodation and transport.

Over het bedrijf

You will join an international high-tech manufacturer in Nijmegen, specializing in precision technology and advanced industrial systems. Every day, highly complex components and assemblies are produced in a cleanroom environment where accuracy, reliability and quality are essential.The company combines advanced technology with a supportive and informal working culture. Collaboration and personal development are important, and employees are given opportunities to develop their skills. The organization also values a healthy work-life balance, helping you grow professionally while maintaining a good balance outside work. The work location in Nijmegen is easily accessible by car from Arnhem, Boxmeer and Tiel, as well as from the German border area, including Kleve and Goch. If you enjoy precision work, want to use your technical expertise every day and want to contribute directly to the quality of high-tech products, this could be a great next step in your career.

Over de vacature

Je start als Junior Mechanical Engineer in een klein, multidisciplinair R&D-team dat meet- en optische systemen ontwikkelt voor uitdagende toepassingen. Dagelijks werk je aan het ontwerpen, modelleren en testen van mechanische componenten en complete assemblies, met oog voor kwaliteit, maakbaarheid en veiligheid. Je bent hands-on betrokken bij assemblage en inspectie, zoals CMM-metingen, laser micro-jet bewerkingen en schok- en vibratietests. Je werkt aan meerdere projecten tegelijk, stemt af met collega-ingenieurs en onderzoekers en levert onderdelen die later in internationale missies of onderzoeksopstellingen worden gebruikt. Er is ruimte om je technische kennis te verdiepen, verantwoordelijkheid te nemen voor subsystems en door te groeien binnen engineering en verificatie.

Functie-inhoud

• Ontwerpen en modelleren van mechanische componenten en samenstellingen met aandacht voor functionaliteit en montagevriendelijkheid.
• Zorgen voor Design for Assembly, inkoopvriendelijke ontwerpen en bewaken van kwaliteit, kosten en levertijden.
• Uitvoeren van assemblage- en testwerk inclusief CMM-inspecties, laser micro-jet bewerkingen en schok- en vibratietests.
• Ontwikkelen en optimaliseren van assemblage- en inspectieprocessen en ondersteunen van implementatie op de werkvloer.

Functie-eisen

• Bachelor in Werktuigbouwkunde of gelijkwaardig en 0-2 jaar ervaring in een hightech of R&D-omgeving.
• Ervaring met CAD-software, bij voorkeur SolidWorks, en goede kennis van materialen en fabricage-toleranties.
• Basiskennis van structurele dynamica, mechanische spanningsanalyse en praktische testanalysevaardigheden.
• Vaardigheid in data‑verwerking met programmeertalen (bij voorkeur Python) en heldere technische documentatie in het Engels.

Wij bieden

• Een detavast-positie met mogelijkheid tot fulltime (40 uur) werken in een technisch gedreven R&D-omgeving.
• Werken aan precisie-instrumenten met internationale relevantie en concrete impact op onderzoeks- en ruimteprojecten.
• Samenwerking met ervaren engineers en onderzoekers, met ruimte voor persoonlijke ontwikkeling en technische groei.
• Flexibele en collegiale werksfeer waarin hands-on oplossen en leren tijdens projecten worden aangemoedigd.

Over de vacature

Je start als Junior Mechanical Engineer in een klein, multidisciplinair R&D-team dat meet- en optische systemen ontwikkelt voor uitdagende toepassingen. Dagelijks werk je aan het ontwerpen, modelleren en testen van mechanische componenten en complete assemblies, met oog voor kwaliteit, maakbaarheid en veiligheid. Je bent hands-on betrokken bij assemblage en inspectie, zoals CMM-metingen, laser micro-jet bewerkingen en schok- en vibratietests. Je werkt aan meerdere projecten tegelijk, stemt af met collega-ingenieurs en onderzoekers en levert onderdelen die later in internationale missies of onderzoeksopstellingen worden gebruikt. Er is ruimte om je technische kennis te verdiepen, verantwoordelijkheid te nemen voor subsystems en door te groeien binnen engineering en verificatie.

Functie-inhoud

• Ontwerpen en modelleren van mechanische componenten en samenstellingen met aandacht voor functionaliteit en montagevriendelijkheid.
• Zorgen voor Design for Assembly, inkoopvriendelijke ontwerpen en bewaken van kwaliteit, kosten en levertijden.
• Uitvoeren van assemblage- en testwerk inclusief CMM-inspecties, laser micro-jet bewerkingen en schok- en vibratietests.
• Ontwikkelen en optimaliseren van assemblage- en inspectieprocessen en ondersteunen van implementatie op de werkvloer.

Functie-eisen

• Bachelor in Werktuigbouwkunde of gelijkwaardig en 0-2 jaar ervaring in een hightech of R&D-omgeving.
• Ervaring met CAD-software, bij voorkeur SolidWorks, en goede kennis van materialen en fabricage-toleranties.
• Basiskennis van structurele dynamica, mechanische spanningsanalyse en praktische testanalysevaardigheden.
• Vaardigheid in data‑verwerking met programmeertalen (bij voorkeur Python) en heldere technische documentatie in het Engels.

Wij bieden

• Een detavast-positie met mogelijkheid tot fulltime (40 uur) werken in een technisch gedreven R&D-omgeving.
• Werken aan precisie-instrumenten met internationale relevantie en concrete impact op onderzoeks- en ruimteprojecten.
• Samenwerking met ervaren engineers en onderzoekers, met ruimte voor persoonlijke ontwikkeling en technische groei.
• Flexibele en collegiale werksfeer waarin hands-on oplossen en leren tijdens projecten worden aangemoedigd.

Over de vacature

Je start als Junior Mechanical Engineer in een klein, multidisciplinair R&D-team dat meet- en optische systemen ontwikkelt voor uitdagende toepassingen. Dagelijks werk je aan het ontwerpen, modelleren en testen van mechanische componenten en complete assemblies, met oog voor kwaliteit, maakbaarheid en veiligheid. Je bent hands-on betrokken bij assemblage en inspectie, zoals CMM-metingen, laser micro-jet bewerkingen en schok- en vibratietests. Je werkt aan meerdere projecten tegelijk, stemt af met collega-ingenieurs en onderzoekers en levert onderdelen die later in internationale missies of onderzoeksopstellingen worden gebruikt. Er is ruimte om je technische kennis te verdiepen, verantwoordelijkheid te nemen voor subsystems en door te groeien binnen engineering en verificatie.

Functie-inhoud

• Ontwerpen en modelleren van mechanische componenten en samenstellingen met aandacht voor functionaliteit en montagevriendelijkheid.
• Zorgen voor Design for Assembly, inkoopvriendelijke ontwerpen en bewaken van kwaliteit, kosten en levertijden.
• Uitvoeren van assemblage- en testwerk inclusief CMM-inspecties, laser micro-jet bewerkingen en schok- en vibratietests.
• Ontwikkelen en optimaliseren van assemblage- en inspectieprocessen en ondersteunen van implementatie op de werkvloer.

Functie-eisen

• Bachelor in Werktuigbouwkunde of gelijkwaardig en 0-2 jaar ervaring in een hightech of R&D-omgeving.
• Ervaring met CAD-software, bij voorkeur SolidWorks, en goede kennis van materialen en fabricage-toleranties.
• Basiskennis van structurele dynamica, mechanische spanningsanalyse en praktische testanalysevaardigheden.
• Vaardigheid in data‑verwerking met programmeertalen (bij voorkeur Python) en heldere technische documentatie in het Engels.

Wij bieden

• Een detavast-positie met mogelijkheid tot fulltime (40 uur) werken in een technisch gedreven R&D-omgeving.
• Werken aan precisie-instrumenten met internationale relevantie en concrete impact op onderzoeks- en ruimteprojecten.
• Samenwerking met ervaren engineers en onderzoekers, met ruimte voor persoonlijke ontwikkeling en technische groei.
• Flexibele en collegiale werksfeer waarin hands-on oplossen en leren tijdens projecten worden aangemoedigd.

Over de vacature

Are you the CNC specialist with a 5-axis turning and milling background that will provide assistance to the Manufacturing Engineering Team and solves problems with a smile?

Please reach out, and become our next CNC Programmer - CAM Engineer at GKN-Fokker Landing Gear!

Over het bedrijf

Fokker Landing Gear, part of GKN Fokker, is a recognized specialist in landing gear and related systems. They focus on the design and development, production and assembly of complete landing gears, as well as the repair and reassembly of systems already in use. In doing so, they work on the most famous aircraft and helicopters; think of the Apache combat helicopter, the F-35 Lightning II (JSF), the Bombardier Dash 8 Q400 and the multipurpose NH90 maritime combat helicopter.

Over de functie

As a skilled and experienced CNC Programmer CAM Engineer you will be responsible for creating NC programs for multi-axis milling and mill-turn machines, as well as providing essential shop floor support to CNC machine operators. This role is critical in ensuring the efficient and precise manufacturing of landing gear parts, and you will play a key role in solving machining problems as they arise.

What you'll do

• Develop / optimize NC programs for multi-axis milling and mill-turn machines using advanced CAM software.
• Provide hands-on shop floor support to CNC operators, ensuring smooth and efficient operations.
• Troubleshoot and resolve machining issues on the shop floor to maintain production quality and efficiency.
• Work closely with other departments to ensure that machining processes meet the required specifications and standards.
• Continuously improve machining processes and contribute to the development of best practices within the department.
• Utilize root cause analysis, preventative and corrective action to reduce / eliminate non-conformances.
• Develop / improve standard operation procedures (SOP).

Wie ben jij?

• Bachelor's in engineering (e.g. Engineering, Manufacturing Technology).
• 5 Years' experience in a hard metal manufacturing and a passion for precision, multi-axis machining.
• Proficient in using CATIA V5. Experience with TopSolid, Siemens NX CAM, Vericut, CrashGuard, Tooltech and TDM is an advantage.
• Strong ability to read and interpret Siemens NC code and Heidenhain.
• Extensive experience with on-machine probing.
• Experience and knowledge with hard metals;
• Proven experience with deep-hole drilling, mill-turning and turning techniques.
• Solid background in operating and programming CNC machines, with a deep understanding of multi-axis milling and mill-turn operations. Problem-solving skills and the ability to work effectively in a fast-paced manufacturing environment.
• Good understanding of GD&T.
• Willingness to work flexible hours to support production activities.
• Excellent communication and teamwork skills to collaborate effectively with CNC operators and other team members.
• Are you a contractor? This opportunity could be very suitable for you as well!

What's in it for you

GKN-Fokker Landing Gear demonstrates passion for innovation and the employees are rightly proud for what they engineer and build. This is a truly challenging work environment: a role where you contribute as an individual but also as a member of a diverse and international team of experts. At GKN-Fokker Landing Gear, they not only provide you with the tools to perform at the best of your capabilities, but they also support and promote your technical and personal development.

Furthermore, they offer you:

• A gross monthly salary up to € 5500,- based on the CLA Metalektro and in line with your experience and qualifications
• At least one year contract via WFS PRO (including possible extension after the first year)
• 8% holiday allowance.
• 25 paid holidays for full-time employment,
• Working conditions according to the CAO Metalektro, including an excellent pension scheme (PME) and travel allowance,
• A pleasant and informal working environment, in which we work together to achieve the best result for our customers in a pleasant atmosphere.

Next to a competitive package, they will offer you a world of opportunities: they want to see your career fly! They will support your career progression by providing you with learning and development opportunities. That's the beauty of being part of a global business, once you're on board you never know where you career journey may take you!

Interesse?

WFS PRO is managing the recruitment process for this role. Apply now and join GKN-Fokker Landing Gear! The application process is carried out by WFS PRO. If you have questions, please contact Niels Kloostra at n.kloostra@wfspro.nl

Over de vacature

Are you the CNC specialist with a 5-axis turning and milling background that will provide assistance to the Manufacturing Engineering Team and solves problems with a smile?

Please reach out, and become our next CNC Programmer - CAM Engineer at GKN-Fokker Landing Gear!

Over het bedrijf

Fokker Landing Gear, part of GKN Fokker, is a recognized specialist in landing gear and related systems. They focus on the design and development, production and assembly of complete landing gears, as well as the repair and reassembly of systems already in use. In doing so, they work on the most famous aircraft and helicopters; think of the Apache combat helicopter, the F-35 Lightning II (JSF), the Bombardier Dash 8 Q400 and the multipurpose NH90 maritime combat helicopter.

Over de functie

As a skilled and experienced CNC Programmer CAM Engineer you will be responsible for creating NC programs for multi-axis milling and mill-turn machines, as well as providing essential shop floor support to CNC machine operators. This role is critical in ensuring the efficient and precise manufacturing of landing gear parts, and you will play a key role in solving machining problems as they arise.

What you'll do

• Develop / optimize NC programs for multi-axis milling and mill-turn machines using advanced CAM software.
• Provide hands-on shop floor support to CNC operators, ensuring smooth and efficient operations.
• Troubleshoot and resolve machining issues on the shop floor to maintain production quality and efficiency.
• Work closely with other departments to ensure that machining processes meet the required specifications and standards.
• Continuously improve machining processes and contribute to the development of best practices within the department.
• Utilize root cause analysis, preventative and corrective action to reduce / eliminate non-conformances.
• Develop / improve standard operation procedures (SOP).

Wie ben jij?

• Bachelor's in engineering (e.g. Engineering, Manufacturing Technology).
• 5 Years' experience in a hard metal manufacturing and a passion for precision, multi-axis machining.
• Proficient in using CATIA V5. Experience with TopSolid, Siemens NX CAM, Vericut, CrashGuard, Tooltech and TDM is an advantage.
• Strong ability to read and interpret Siemens NC code and Heidenhain.
• Extensive experience with on-machine probing.
• Experience and knowledge with hard metals;
• Proven experience with deep-hole drilling, mill-turning and turning techniques.
• Solid background in operating and programming CNC machines, with a deep understanding of multi-axis milling and mill-turn operations. Problem-solving skills and the ability to work effectively in a fast-paced manufacturing environment.
• Good understanding of GD&T.
• Willingness to work flexible hours to support production activities.
• Excellent communication and teamwork skills to collaborate effectively with CNC operators and other team members.
• Are you a contractor? This opportunity could be very suitable for you as well!

What's in it for you

GKN-Fokker Landing Gear demonstrates passion for innovation and the employees are rightly proud for what they engineer and build. This is a truly challenging work environment: a role where you contribute as an individual but also as a member of a diverse and international team of experts. At GKN-Fokker Landing Gear, they not only provide you with the tools to perform at the best of your capabilities, but they also support and promote your technical and personal development.

Furthermore, they offer you:

• A gross monthly salary up to € 5500,- based on the CLA Metalektro and in line with your experience and qualifications
• At least one year contract via WFS PRO (including possible extension after the first year)
• 8% holiday allowance.
• 25 paid holidays for full-time employment,
• Working conditions according to the CAO Metalektro, including an excellent pension scheme (PME) and travel allowance,
• A pleasant and informal working environment, in which we work together to achieve the best result for our customers in a pleasant atmosphere.

Next to a competitive package, they will offer you a world of opportunities: they want to see your career fly! They will support your career progression by providing you with learning and development opportunities. That's the beauty of being part of a global business, once you're on board you never know where you career journey may take you!

Interesse?

WFS PRO is managing the recruitment process for this role. Apply now and join GKN-Fokker Landing Gear! The application process is carried out by WFS PRO. If you have questions, please contact Niels Kloostra at n.kloostra@wfspro.nl

Over de vacature

B1.3 Licensed Engineers wanted (location: Woensdrecht - The Netherlands)

“Aviation is what we breathe. It's our past, present, and future." Are you ready to join an innovative, specialized team with global impact?

Over het bedrijf

Fokker Techniek specializes in MRO (Maintenance, Repair, and Overhaul) services, handling everything from minor repairs to extensive inspections under EASA's Design Organisation Approval (DOA). Fokker Techniek can manage the complete design and development process in-house, including certification and flight testing. With a focus on quality and innovation, Fokker is a leader in aviation maintenance and technology.

Over de functie

As a Licensed B1.3 Engineer, you'll take on a critical role in maintaining and inspecting military helicopter systems and engines, ensuring compliance with MAA-NLD regulations. Working with an expert team (both civil and military members), you'll be hands-on in assembly, disassembly, and in-depth fault analysis. From minor modifications up to heavy maintenance! Together with your colleagues you are responsible for releasing military helicopter back into service, and in this process, you will supervise less experienced engineers.

Wie ben jij?

• Hold an EASA AML B1.3 (civil) and/or you have extensive NH90 experience
• Able to perform base maintenance checks
• Have a comprehensive logbook with documented experience.
• Strong in technical English communication.
• Solution-oriented, with effective team collaboration skills.
• Detail-oriented with a commitment to safety and quality standards.
• You are keen to enter into a long employment relationship where you can develop as a professional. To be clear: this role is therefore not a contractor opportunity.

What's in it for you

• Competitive Salary: Earn between €4300 and €4500 per month, based on your type ratings and experience. Note: we are fully transparent in what you will earn, so there are no unexpected surprises. We indicate exactly what you will have left in your pocket each month to spend freely after all expenses.
• Path to Permanent Employment: Start with a one-year contract at WFS PRO, with the potential for a permanent role at Fokker Techniek.
• Professional Development: Gain access to training and support tailored to enhance your skills and accelerate your career. We also introduce you to the Dutch language through an online language course, sponsored by WFS PRO.
• Relocation assistance, allowance and housing: We give you clear insight to the relocation process and ensure a smooth transition to the Netherlands. We'll also help arrange your accommodation, making your move seamless. On top of that, you get a relocation allowance of up to € 2500 (single) or up to € 5000 (families) for moving to the Netherlands.
• Tax Benefits: Receive tax breaks or other financial benefits for the first 5 years.
• Additional Financial Benefits: You get a travel allowance for car and bike: €0,23 per kilometer (from 10km), an 8% holiday allowance, also, your salary increases each year (CLA increase and performance bonus) and you have the possibility to convert ADV-days in additional income (up to 2% up to gross salary).
• Discounted or Free options: You get access to fitness facilities at a reduced rate and free access to GoodHabitz, with more than 1000 lessons to improve yourself.

Interesse?

Want to take flight in your career with us? Reach out to Niels Kloostra via n.kloostra@wfspro.nl for more information. When applying, please add your resume, full AML and logbook.

Over de vacature

B1.3 Licensed Engineers wanted (location: Woensdrecht - The Netherlands)

“Aviation is what we breathe. It's our past, present, and future." Are you ready to join an innovative, specialized team with global impact?

Over het bedrijf

Fokker Techniek specializes in MRO (Maintenance, Repair, and Overhaul) services, handling everything from minor repairs to extensive inspections under EASA's Design Organisation Approval (DOA). Fokker Techniek can manage the complete design and development process in-house, including certification and flight testing. With a focus on quality and innovation, Fokker is a leader in aviation maintenance and technology.

Over de functie

As a Licensed B1.3 Engineer, you'll take on a critical role in maintaining and inspecting military helicopter systems and engines, ensuring compliance with MAA-NLD regulations. Working with an expert team (both civil and military members), you'll be hands-on in assembly, disassembly, and in-depth fault analysis. From minor modifications up to heavy maintenance! Together with your colleagues you are responsible for releasing military helicopter back into service, and in this process, you will supervise less experienced engineers.

Wie ben jij?

• Hold an EASA AML B1.3 (civil) and/or you have extensive NH90 experience
• Able to perform base maintenance checks
• Have a comprehensive logbook with documented experience.
• Strong in technical English communication.
• Solution-oriented, with effective team collaboration skills.
• Detail-oriented with a commitment to safety and quality standards.
• You are keen to enter into a long employment relationship where you can develop as a professional. To be clear: this role is therefore not a contractor opportunity.

What's in it for you

• Competitive Salary: Earn between €4300 and €4500 per month, based on your type ratings and experience. Note: we are fully transparent in what you will earn, so there are no unexpected surprises. We indicate exactly what you will have left in your pocket each month to spend freely after all expenses.
• Path to Permanent Employment: Start with a one-year contract at WFS PRO, with the potential for a permanent role at Fokker Techniek.
• Professional Development: Gain access to training and support tailored to enhance your skills and accelerate your career. We also introduce you to the Dutch language through an online language course, sponsored by WFS PRO.
• Relocation assistance, allowance and housing: We give you clear insight to the relocation process and ensure a smooth transition to the Netherlands. We'll also help arrange your accommodation, making your move seamless. On top of that, you get a relocation allowance of up to € 2500 (single) or up to € 5000 (families) for moving to the Netherlands.
• Tax Benefits: Receive tax breaks or other financial benefits for the first 5 years.
• Additional Financial Benefits: You get a travel allowance for car and bike: €0,23 per kilometer (from 10km), an 8% holiday allowance, also, your salary increases each year (CLA increase and performance bonus) and you have the possibility to convert ADV-days in additional income (up to 2% up to gross salary).
• Discounted or Free options: You get access to fitness facilities at a reduced rate and free access to GoodHabitz, with more than 1000 lessons to improve yourself.

Interesse?

Want to take flight in your career with us? Reach out to Niels Kloostra via n.kloostra@wfspro.nl for more information. When applying, please add your resume, full AML and logbook.

Over de vacature

In het kort
Drie redenen waarom deze vacature uniek is!

• Jij bouwt complete hightech ovens die bijdragen aan de productie van chips wereldwijd
• Je krijgt de volledige verantwoordelijkheid over jouw eigen machine van begin tot eind
• Je werkt in een gestructureerde en moderne omgeving waar techniek en innovatie samenkomen

De organisatie
Hier ga je aan de slag

Al meer dan 50 jaar ontwikkelt deze internationale speler technologische oplossingen voor de halfgeleiderindustrie. Denk aan geavanceerde ovens en systemen die gebruikt worden bij het maken van chips, zonnecellen en fotonica.

Door te blijven investeren in R&D en duurzaamheid heeft dit bedrijf zich stevig gepositioneerd als marktleider in een technische niche die volop in ontwikkeling is.

Als monteur werk je aan innovatieve producten die wereldwijd worden ingezet. Je komt terecht in een professioneel team met een prettige werksfeer en duidelijke structuur. Alles is netjes geregeld en je krijgt echt de kans om te groeien in je vak.

De functie
Dit ga je doen

Als Monteur Machinebouw ben jij verantwoordelijk voor de opbouw van complete ovens waarin siliciumplaten worden behandeld. Dit is een onmisbare stap in het productieproces van microchips.

Elke oven is uniek. Dat betekent veel variatie in je werk en de kans om steeds weer iets nieuws te leren. Je bouwt van begin tot eind aan jouw eigen machine en werkt nauw samen met collega's in de final assembly.

Wat je doet:

• Opbouwen van de behuizing aan de hand van werktekeningen
• Monteren van mechanische en elektrotechnische componenten
• Bouwen van panelen, bedrading aanleggen en elektronica aansluiten
• Meewerken aan testen en het finetunen van de machine voordat deze de deur uitgaat

Zodra de oven is afgerond en in delen wordt verzonden naar de klant, start jij met het volgende project. Zo blijft je werk afwisselend en uitdagend.

Het aanbod
Dit krijg je ervoor terug

Je komt te werken bij een moderne werkgever die investeert in mensen, techniek en werkplezier. En dat merk je. Je krijgt veel verantwoordelijkheid, werkt aan producten met impact én profiteert van goede voorwaarden.

Wat je kunt verwachten:

• Bruto maandsalaris tussen € 3.000 en € 3.800
• 25 vakantiedagen en 13 ADV-dagen
• Reiskostenvergoeding van € 0,23 per kilometer
• Actieve personeelsvereniging met leuke uitjes en activiteiten
• Uitzicht op een vast contract na een succesvolle detacheringsperiode via Profield

Wat wij van jou verwachten
Herken jij jezelf?

Jij bent een techneut die graag met beide handen werkt en gevoel heeft voor detail. Je vindt het leuk om vanaf de basis te bouwen en bent niet vies van kabels trekken of panelen opbouwen.

Wat we graag in je zien:

• Mbo niveau 3 of 4 in elektrotechniek, mechatronica of vergelijkbaar
• Je kunt schema's lezen en werkt gestructureerd
• Ervaring in de paneelbouw is mooi meegenomen
• Je bent praktisch ingesteld, werkt nauwkeurig en denkt in oplossingen
• Je werkt graag samen maar kunt ook zelfstandig goed uit de voeten

Sollicitatie procedure
Stap voor stap richting een nieuwe baan

• Je solliciteert

  Wij bekijken je sollicitatie zorgvuldig en nemen binnen 1 werkdag contact met je op.

• We gaan kennismaken

  In een persoonlijk gesprek bespreken we jouw ambitie & wensen. Natuurlijk bespreken we ook alle ins & outs van de vacature.

• Gesprekken plannen

  Als jij een positief gevoel hebt gaan wij aan de slag om je op gesprek te krijgen bij onze partner. Daarnaast kunnen we ook onderzoeken of er meer opties in ons netwerk voor je zijn.

• Arbeidsvoorwaarden matchen

  Is er een klik? Dan verzorgen wij de eventuele onderhandelingen en stellen een passend aanbod op.

• Het is een match!

  Onze backoffice regelt het papierwerk, zodat je kunt starten. Tijdens je Profield-periode sta je in nauw contact met je Field Manager. Zo weten we zeker dat het een match blijft!

Interesse? Kom in contact! Ben jij enthousiast over de functie van Monteur Machinebouw? Klik dan op 'Solliciteren'. Meer weten? Bel, mail of WhatsApp met Jorn Kappert.

Mobiel: 06 -
E-mail:

Functies bij Profield: Field Service Engineer, Servicemonteur, Service Engineer, Monteur Technische Dienst, Medewerker Technische Dienst, Onderhoudsmonteur, Ploegenmonteur, Service Technicus, Storingsmonteur, Mechanisch Monteur, Elektromonteur, Allround Monteur, Inbedrijfsteller en Commissioning Engineer