Line operator Vacatures

Over de vacature

Bedrijfsomschrijving:

Locatie: Horst.

Deze organisatie is actief in de industriële productie en werkt met een verpakkingslijn die door de Line Operator wordt bediend en afgesteld. Het productieteam voert werkzaamheden rond de lijn uit en wordt in de dagelijkse productie aangestuurd en ondersteund door de Line Operator. De productieomgeving in Horst vraagt om aandacht voor een probleemloze en storingsvrije werking van de verpakkingslijn. Dagelijkse controles helpen afwijkingen tijdig te signaleren, waarna direct corrigerende acties worden uitgevoerd om kwaliteitsverlies te voorkomen. Ook ondersteuning bij onderhoud en het zoeken naar kleine storingen hoort bij het werk rond de lijn. Daarmee is de functie gericht op het beperken van uitvaltijd en het ondersteunen van de productie-efficiëntie. De werkzaamheden omvatten ook het terugkoppelen van resultaten en verbeteringen aan de leidinggevende. Informatie uit het dagelijkse werk draagt bij aan procesoptimalisaties. De rol brengt bediening, afstelling, controles en samenwerking met productiemedewerkers samen. De Line Operator heeft daarbij een rol in zowel de voortgang van de verpakkingslijn als de ondersteuning van het team. De werkzaamheden verbinden het bedienen van de lijn met het signaleren van afwijkingen en het uitvoeren van passende correcties. Zo ondersteunt de functie de continuïteit van de productie en de aandacht voor kwaliteit.

Wil jij in regio Horst tot €3950 verdienen als Procesoperator? Solliciteer dan direct!

Functie-inhoud:

• Als Line Operator ben je verantwoordelijk voor een probleemloze werking van de verpakkingslijn en het aansturen van het productieteam
• Als Line Operator bedien en stel je de verpakkingslijn af om de productie-efficiëntie te ondersteunen
• Je voert dagelijkse controles uit en signaleert afwijkingen
• Als Line Operator stuur je productiemedewerkers aan en ondersteun je hen bij hun werkzaamheden
• Je ondersteunt bij onderhoud en het zoeken naar kleine storingen om uitvaltijd te beperken
• Je rapporteert resultaten en verbeteringen aan de leidinggevende en draagt bij aan procesoptimalisaties

Functie-eisen:

• Je kunt een verpakkingslijn bedienen en afstellen
• Je hebt oog voor afwijkingen en kunt direct corrigerende acties uitvoeren
• Je kunt productiemedewerkers aansturen en ondersteunen bij hun werkzaamheden
• Je hebt technisch inzicht om te ondersteunen bij onderhoud en het zoeken naar kleine storingen
• Je kunt resultaten en verbeteringen rapporteren en bijdragen aan procesoptimalisaties

Wij bieden:

• Salaris: €2.750 - €3.950 bruto per maand
• 25 vakantiedagen, 8% vakantiegeld
• Een goede pensioenregeling
• Reiskostenvergoeding
• Volop mogelijkheden om jezelf te ontwikkelen en door te groeien
• Mogelijkheden om verschillende cursussen te volgen
• Een prettige werkomgeving met leuke personeelsactiviteiten

Over de vacature

Wat je gaat doen As an Operator, you ensure that the production line runs safely, efficiently, and without interruptions. You will start with an extensive on-the-job training programme, during which an experienced coach will guide and support you. This allows you to become familiar with the machinery and gain an in-depth understanding of the entire production process.

Your responsibilities will include:

• Operating, monitoring, and adjusting advanced production lines.
• Monitoring product quality, safety, and production progress.
• Identifying, analysing, and resolving process disruptions.
• Performing minor maintenance tasks and simple repairs.
• Working closely with maintenance technicians to resolve technical issues.
• Following safety regulations and established procedures.
• Actively contributing ideas to improve the production process.
• Guiding and supporting new colleagues.
• Maintaining a safe, clean, and well-organised workplace.

Wat we je bieden

You will join a stable employer that invests in its employees. Personal development, safety, and job satisfaction are key priorities. You will work in a modern production environment with advanced technology, alongside colleagues who work together to maintain a safe and efficient production process.

You can look forward to the following benefits:

• A gross monthly salary between €4,000 and €5,000, including a 27.50% shift allowance and ADV allowance.
• 25 days of annual leave and 8% holiday pay.
• A 13th-month salary.
• A travel allowance of €0.25 per KM.
• A position with the prospect of a permanent contract.
• Extensive training and career development opportunities.
• Working in a modern production environment with advanced technology.
• A pleasant working atmosphere within a committed team.
• An active staff association and enjoyable company activities.

At Start People, we follow the principle of equal pay. This means that your employment conditions will align with those of colleagues directly employed by the client. In addition to your hourly wage, your employment package may also include annual leave, allowances, ADV compensation, and other salary components.

Functie-eisen

We are looking for a technically minded Operator who takes responsibility, enjoys working with technology, and is eager to continue learning and developing professionally.

To be successful in this role, you will have:

• At least an MBO level 3 diploma in a technical field.
• Good command of the English language to understand safety instructions.
• Willingness to work in a 5-shift system.
• Own accomodation and transportation.
• Technical insight and demonstrable technical skills.
• A proactive attitude and a willingness to learn.
• Strong analytical and problem-solving skills.
• A strong sense of responsibility and the ability to work independently.
• The ability to work effectively both independently and as part of a team.

Over het bedrijf

You will work at a modern manufacturing company that produces high-quality products contributing to hygiene and everyday life. Together with your colleagues, you will ensure that the production process runs safely, efficiently, and according to established quality standards. You will be part of a committed team where teamwork, knowledge sharing, and continuous improvement are important. In addition, you will have the opportunity to further develop your technical skills and gain more experience in your role. The work location is easily accessible from both Nijmegen and Oss.

Questions about this vacancy?

Please contact our Nijmegen office on . We are happy to help and provide more information about the position and the company.

Over de vacature

Wat je gaat doen

As an Operator, you will ensure that the production line continues to run safely, efficiently, and without interruptions. You will start with an extensive on-the-job training programme, supported by an experienced coach. This will help you gain an in-depth understanding of both the machinery and the production process, giving you the knowledge and confidence to excel in your role. Your responsibilities will include:

• Operating, monitoring, and adjusting advanced production lines.
• Ensuring product quality, workplace safety, and production progress.
• Identifying, analysing, and resolving process disruptions.
• Performing minor maintenance tasks and simple repairs.
• Working closely with maintenance technicians to resolve technical issues.
• Following safety regulations and established procedures.
• Actively contributing ideas to improve the production process.
• Guiding and supporting new colleagues.
• Maintaining a safe, clean, and well-organised workplace.

Wat we je bieden

You will join a stable employer that invests in its employees. Personal development, safety, and job satisfaction are key priorities. You will have the opportunity to work with advanced technology in a modern production environment while building your skills and developing your career.

What you can expect:

• A gross monthly salary between €4,000 and €5,000, including a 27.50% shift allowance and ADV allowance.
• 25 vacation days and 8% holiday pay.
• A 13th-month salary.
• A travel allowance of €0.25 per KM.
• A position with the prospect of a permanent contract.
• Extensive training and career development opportunities.
• A modern production environment equipped with advanced technology.
• A pleasant working atmosphere within a committed and supportive team.
• An active staff association and enjoyable company activities.

At Start People, we follow the principle of equal pay. This means that your employment conditions will align with those of colleagues directly employed by the client. In addition to your hourly wage, your employment package may also include annual leave, shift allowances, ADV compensation, and other salary components.

Functie-eisen

We are looking for a technically minded Operator who takes responsibility, enjoys solving problems, and is motivated to keep learning and developing professionally.

To be successful in this role, you will have:

• At least an MBO level 3 diploma in a technical field.
• Good command of the English language to understand safety instructions.
• Own accomodation and transportation.
• Willingness to work in a 5-shift system.
• Technical insight and demonstrable technical skills.
• A proactive attitude and a strong willingness to learn.
• Good analytical and problem-solving skills.
• A strong sense of responsibility and the ability to work independently.
• The ability to work effectively both independently and as part of a team.

Over het bedrijf

You will work at a modern manufacturing company that produces high-quality products every day that contribute to hygiene and everyday life. Together with your colleagues, you will ensure that the production process runs safely, efficiently, and in accordance with quality standards. Teamwork and continuous improvement are central to the working environment. You will also have the opportunity to expand your technical knowledge and develop your skills further within the profession. The work location is easily accessible from both Nijmegen and Oss.

Questions about this vacancy?

Please contact our Nijmegen office on 024 382 81 05. We are happy to help and provide more information about the position and the company.

Over de vacature

Bedrijfsomschrijving:

Locatie: Leeuwarden.

Deze organisatie is actief binnen de maakindustrie en richt zich op gestandaardiseerde productieprocessen en kwaliteitsproducten in een professionele omgeving. In Leeuwarden ondersteunt deze organisatie de lokale productie met geordende ploegen en nadruk op veiligheid en procesoptimalisatie. Medewerkers werken met duidelijke procedures en krijgen de kans om vakkennis uit te breiden door interne trainingen en gerichte coaching. De cultuur wordt gekenmerkt door samenwerking tussen ploegteams, een praktische aanpak van problemen en een focus op het behalen van productiedoelstellingen binnen afgesproken kwaliteitsnormen. Verder biedt deze organisatie ervaring met moderne productielijnen binnen de maakindustrie en mogelijkheden om betrokken te zijn bij verbetertrajecten en efficiencyprogramma's. De functie biedt een salarisindicatie van €2600 - €4500 bruto per maand en wordt afgestemd op ervaring en vaardigheden van de kandidaat. De werkomgeving is gestructureerd en gericht op veilige uitvoering van processen, waarbij aandacht is voor persoonlijke ontwikkeling en vakmanschap. Kandidaten in Leeuwarden vinden hier een stabiele werkplek met een duidelijk opleidingstraject en kansen om door te groeien binnen technische functies.

Wil jij in regio Leeuwarden tot €4500 verdienen als Operator B 3 Ploegen? Solliciteer dan direct!

Functie-inhoud:

• Als Operator B 3 Ploegen ben je verantwoordelijk voor het veilig en efficiënt bedienen van productielijnen als Operator B 3 Ploegen;
• Je stelt machines in, bewaakt procesparameters en voert kwaliteitscontroles uit;
• Je lost storingen op en voert preventief onderhoud uit aan processen en installaties;
• Je werkt volgens veiligheids- en hygiënevoorschriften en draagt bij aan verbeterprojecten;
• Je rapporteert aan de ploegleider en zorgt voor een nette overdracht bij wisseling van diensten;
• Je stelt zelfstandig productielijnen in, neemt full line responsibility tijdens je dienst, lost mechanische storingen op en voert basis elektrische handelingen uit zoals zekeringen vervangen en sensoren controleren, en schakelt de technische dienst in bij complexere problemen;

Functie-eisen:

• Minimaal VMBO of MBO diploma, bij voorkeur richting Elektrotechniek of Werktuigbouwkunde;
• Ervaring als operator of in een productieomgeving, medior niveau gewenst;
• Technisch inzicht en vaardigheid in het instellen van productieapparatuur;
• Bereidheid om in een 3-ploegendienst te werken;
• Goede beheersing van de Nederlandse taal, mondeling en schriftelijk;
• Fysiek in staat om staand werk te verrichten en producten te verplaatsen;

Wij bieden:

• Salaris: €2600 - €4500 per maand;
• 25 vakantiedagen;
• Ploegentoeslag bij 3-ploegen;
• Mogelijkheden voor doorgroei en scholing;
• Pensioenregeling;
• Reiskostenvergoeding;

Over de vacature

Wat je gaat doen As a Forklift Operator, you play an important role in keeping the warehouse and production department running smoothly. Without the right materials arriving on time, the production line cannot continue. Your job is to make sure materials are delivered when needed and goods are moved safely and efficiently. You will have an active and varied working day. One moment, you might be unloading a trailer. The next, you will be driving a forklift to transport materials to the correct location. At the same time, you will keep an eye on what the production line needs to keep everything moving.
Your main responsibilities include:

• Loading and unloading trailers;
• Operating a forklift, reach truck and electric pallet truck (EPT);
• Supplying materials to the production line;
• Moving and handling goods safely and efficiently;
• Using scanners and logistics systems.

You will work in an environment where the pace can change throughout the day. Being flexible and able to adjust when priorities change is therefore important. Wat we je bieden You will join an active logistics environment where you can develop your skills and explore opportunities for career growth.
You can expect:

• A starting salary based on the applicable minimum wage;
• The opportunity to increase your salary to approximately €16 gross per hour, depending on your performance;
• Early and late shifts;
• Opportunities to develop and progress into other operational roles;
• A diverse team with colleagues of different ages and backgrounds.

Occasionally, you may need to work longer hours or switch between early and late shifts. Flexibility is an important part of this position. Functie-eisen You will join an active logistics environment where you can develop your skills and explore opportunities for career growth.
You can expect:

• A starting salary based on the applicable minimum wage;
• The opportunity to increase your salary to approximately €16 gross per hour, depending on your performance;
• Early and late shifts;
• Opportunities to develop and progress into other operational roles;
• A diverse team with colleagues of different ages and backgrounds.

Occasionally, you may need to work longer hours or switch between early and late shifts. Flexibility is an important part of this position. Over het bedrijf

You will be working for a large organisation in Groenlo, where goods are received, transported and supplied to production every day. You will join a diverse team with colleagues of different ages, nationalities and cultural backgrounds. English-speaking candidates are also welcome, so speaking Dutch is not necessarily required.Teamwork and reliability are important within the company. At the same time, you will have the opportunity to demonstrate your skills and take on more responsibilities. If you perform well and are motivated to learn, there are various opportunities to develop within the organisation, especially in operational positions. The workplace in Groenlo is easily accessible from Lichtenvoorde, Eibergen, Winterswijk and Borculo.

Unloading trailers, transporting goods and making sure the production line has everything it needs. Thanks to your work, the entire process keeps moving. Are you reliable, flexible and do you enjoy operating a forklift? Apply now for the Forklift Operator position in Groenlo and discover your opportunities! Do you have any questions? Feel free to contact Start People Borculo on or email . We will be happy to tell you more about the position.

Over de vacature

Wat ga je precies doen Imagine starting your working day not on a standard production floor, but in a modern cleanroom where precision and high-tech engineering come together. The products you work on could eventually be used in MRI scanners, satellites and other advanced technologies. Pretty impressive for a production job, right?

As a Cleanroom Operator working in a 2-shift system, you will help manufacture metal hoses and technical components that have to meet strict quality standards. No previous cleanroom experience? No problem. Technical knowledge? Definitely a plus. What matters most is your motivation, attention to detail and willingness to learn.

What will you do?

You will work as part of a dedicated team producing components where even the smallest detail can make a difference.

Your responsibilities will include:

• Assembling and installing metal hoses and technical components;
• Working from technical drawings and clear work instructions;
• Checking products for quality, leaks and pressure resistance;
• Cleaning components and carefully preparing them for shipment;
• Following strict quality and hygiene procedures;
• Contributing ideas to improve the production process and working closely with your colleagues;
• Working in a controlled cleanroom environment where accuracy is more important than speed.
• You will receive proper training and learn step by step how to work with the products, materials and techniques.

Working in 2 shifts

You will work in a structured 2-shift system, alternating between morning and afternoon shifts. This gives you a clear routine during the week - and on Fridays, you can start your weekend nice and early.

The morning shift is from Monday through Thursday from 06:00 - 15:00 and Friday from 06:00 - 12:00 with paid breaks! The afternoonshift is from Monday through Thursday from 14:45 - 23:45 and Friday from 12:00 - 18:00 also with paid breaks! Wat bieden we jou A job in high-tech manufacturing requires craftsmanship and precision. Naturally, we offer a good package in return:

• €3,170 to €3,668 gross per month;
• 2-shift allowance of 13.3% on top of your salary;
• A 38-hour working week;
• If both you and the client are happy with the cooperation, you will be offered a contract directly with the client after approximately 6 months.
• €0.23 per kilometre travel allowance, temporarily increased to €0.25;
• Good pension scheme;
• Opportunity to earn bonuses;
• Training and courses to develop your skills;
• Career opportunities within the organisation;
• A modern, clean and quiet working environment;
• An informal team where hard work and having a laugh go hand in hand.

Functie-eisen You don't need years of experience working in a cleanroom. Perhaps you have experience in production, assembly, engineering or even a completely different industry. As long as you work accurately and enjoy learning new things, you can succeed in this role.

We are looking for someone who:

• Has an affinity with technology and/or production;
• Works accurately and has a strong eye for quality;
• Is interested in high-tech products;
• Is willing to work in a 2-shift system;
• Speaks either Dutch or English;
• Enjoys working as part of a team and has a positive attitude.

Experience with technical drawings or previous cleanroom experience is a plus, but certainly not a requirement. Over het bedrijf You will join an innovative high-tech organisation in Tilburg. The company develops and manufactures metal and plastic hose and piping systems for industries including medical technology, manufacturing and aerospace.

So, this isn't your typical production line. You will be working on components that can ultimately find their way into an MRI scanner or even a satellite.

The working atmosphere is informal and friendly. Communication lines are short, colleagues support each other and there is plenty of room for a joke along the way. At the same time, everyone takes quality seriously.

Would you like to use your own hands to work on technology that you would normally only see in high-tech laboratories or the aerospace industry? Then this could be exactly the next step you're looking for.

Over de vacature

Vacaturebeschrijving

Join our team as a Production Worker Plus and take your first steps into the world of production. You'll handle packaging tasks initially, while receiving training to master the machinery and packaging line. Remember to arrange your own transport for the early morning shifts. Submit your application now!

As a Production Worker Plus, your role involves assisting with packaging products while you learn about the machines and the packaging line. You will begin with various production and packaging tasks, gradually taking on more technical responsibilities. This hands-on experience will help you operate parts of the line, change packaging materials, and support the line changeovers. You will have the opportunity to advance to a Packaging Operator with greater responsibilities.

Your responsibilities include:

• Checking the quality of packaged products, including coding and labels
• Preparing boxes and stacking products efficiently
• Operating basic parts of the packaging line and ensuring buffers are filled
• Changing film and labels while assisting with line start-ups and changeovers
• Reporting any issues in the packaging process promptly and maintaining a clean and safe work environment

Please note: you will work rotating shifts from 06:00 to 15:00 or from 15:00 to 00:00. Having your own transport is essential, as public transport won't get you to work on time. Discover your future workplace
You will work for a production company in the food industry. Different departments work together every day to produce high-quality food products. You will work in a dynamic production environment with different tasks and workstations. This keeps the job varied and gives you the opportunity to learn new skills. Together with your colleagues, you make sure the production process runs smoothly. There are plenty of opportunities to develop yourself, learn new skills and take on more responsibility.

Salarisomschrijving

€3.038 per maand

Over de werkgever

Wat wij bieden

• A gross monthly salary from €3.037,50
• A varied job in a 2-shift system
• On-the-job training to help you learn how to work with machines and packaging lines
• Opportunities to grow into a Packaging Operator role and develop further within the company
• Training and development opportunities through Perflexxion and the company
• Varied tasks across different packaging lines and workstations
• More independence and responsibility as your knowledge and experience grow
• A professional working environment within the food industry
• Travel allowance of €0.25 per kilometre, for one-way distances from 10 to a maximum of 35 km

Over de vacature

Bedrijfsomschrijving:

Locatie: Hoogezand.
Deze organisatie is actief in de vervaardiging van golfpapier en -karton en werkt vanuit Hoogezand. Binnen de productieomgeving staat het betrouwbaar en veilig functioneren van productielijnen centraal. De organisatie combineert dagelijkse productie met aandacht voor technische verbeteringen en procesoptimalisatie. In het Resource Support Team werken een Line Leader, een Mechanical Specialist, een Process Engineer en de Electrical Specialist samen. Ook is er nauwe afstemming met operators, productieteams en andere Electrical Specialists, zodat kennis en ervaring worden gedeeld. De Electrical Specialist draagt verantwoordelijkheid voor de besturingstechnische, regeltechnische en elektrotechnische staat van een productielijn. Daarbij horen het analyseren en oplossen van storingen, het uitvoeren van projecten en modificaties en het verbeteren van de betrouwbaarheid van installaties. De werkzaamheden omvatten zowel hardware- als softwarecomponenten, waaronder PLC-programmering en motion systemen. Operators worden betrokken bij onderhoud en optimalisatie van hun machineonderdeel, met equipment ownership als uitgangspunt. Veiligheid krijgt dagelijks aandacht door veilige werkwijzen te borgen en risico’s te signaleren. De werkdag begint met gezamenlijk overleg over de afgelopen 24 uur en het stellen van prioriteiten. De ochtend speelt zich grotendeels af op de werkvloer; de middag is gericht op projecten en verbeterinitiatieven. De organisatie biedt in- en externe trainingen en ruimte voor ontwikkeling.
Wil jij in regio Hoogezand tot €4500 verdienen als Monteur Technische Dienst? Solliciteer dan direct!

Functie-inhoud:

• Als Elektrotechnisch Specialist ben je verantwoordelijk voor de besturingstechnische en elektrotechnische staat van een productielijn
• Je ondersteunt het productieteam bij het analyseren, oplossen en voorkomen van storingen
• Als Elektrotechnisch Specialist coach je operators bij probleemanalyses en procesverbetering
• Je initieert en voert elektrotechnische projecten en modificaties uit, waaronder werk aan hardware, software, PLC-programmering en motion systemen
• Je verbetert de betrouwbaarheid van installaties en stimuleert operators om betrokken te zijn bij onderhoud en optimalisatie van hun machineonderdeel
• Je borgt veilige werkwijzen, werkt samen met collega-specialisten en productieteams en stelt tijdens het dagelijkse overleg prioriteiten
• Je werkt in dagdienst, bent in de ochtend veel op de werkvloer en richt je in de middag op projecten en verbeterinitiatieven

Functie-eisen:

• Je hebt een afgeronde mbo-4-opleiding in Elektrotechniek, Besturingstechniek of Mechatronica
• Je hebt ervaring in een productie- of engineeringsomgeving
• Je hebt kennis van elektrotechniek en besturingstechniek en affiniteit met industriële automatisering
• Je communiceert sterk en werkt graag samen met verschillende disciplines
• Je hebt oog voor veiligheid en integreert dit in je dagelijkse werk
• Je bent enthousiast, leergierig en neemt initiatief

Wij bieden:

• Salaris: €2.750 – €4.500 bruto per maand
• Een vaste dertiende maand
• Een bonusregeling van 0–7%, gekoppeld aan bedrijfsresultaten
• 25 vakantiedagen en 11,5 ADV-dagen
• Een informele werksfeer met ruimte voor ontwikkeling
• In- en externe trainingen om je kennis en competenties te versterken
• Reiskostenvergoeding

Over de vacature

Are you the CNC specialist with a 5-axis turning and milling background that will provide assistance to the Manufacturing Engineering Team and solves problems with a smile?

Please reach out, and become our next CNC Programmer - CAM Engineer at GKN-Fokker Landing Gear!

Over het bedrijf

Fokker Landing Gear, part of GKN Fokker, is a recognized specialist in landing gear and related systems. They focus on the design and development, production and assembly of complete landing gears, as well as the repair and reassembly of systems already in use. In doing so, they work on the most famous aircraft and helicopters; think of the Apache combat helicopter, the F-35 Lightning II (JSF), the Bombardier Dash 8 Q400 and the multipurpose NH90 maritime combat helicopter.

Over de functie

As a skilled and experienced CNC Programmer CAM Engineer you will be responsible for creating NC programs for multi-axis milling and mill-turn machines, as well as providing essential shop floor support to CNC machine operators. This role is critical in ensuring the efficient and precise manufacturing of landing gear parts, and you will play a key role in solving machining problems as they arise.

What you'll do

• Develop / optimize NC programs for multi-axis milling and mill-turn machines using advanced CAM software.
• Provide hands-on shop floor support to CNC operators, ensuring smooth and efficient operations.
• Troubleshoot and resolve machining issues on the shop floor to maintain production quality and efficiency.
• Work closely with other departments to ensure that machining processes meet the required specifications and standards.
• Continuously improve machining processes and contribute to the development of best practices within the department.
• Utilize root cause analysis, preventative and corrective action to reduce / eliminate non-conformances.
• Develop / improve standard operation procedures (SOP).

Wie ben jij?

• Bachelor's in engineering (e.g. Engineering, Manufacturing Technology).
• 5 Years' experience in a hard metal manufacturing and a passion for precision, multi-axis machining.
• Proficient in using CATIA V5. Experience with TopSolid, Siemens NX CAM, Vericut, CrashGuard, Tooltech and TDM is an advantage.
• Strong ability to read and interpret Siemens NC code and Heidenhain.
• Extensive experience with on-machine probing.
• Experience and knowledge with hard metals;
• Proven experience with deep-hole drilling, mill-turning and turning techniques.
• Solid background in operating and programming CNC machines, with a deep understanding of multi-axis milling and mill-turn operations. Problem-solving skills and the ability to work effectively in a fast-paced manufacturing environment.
• Good understanding of GD&T.
• Willingness to work flexible hours to support production activities.
• Excellent communication and teamwork skills to collaborate effectively with CNC operators and other team members.
• Are you a contractor? This opportunity could be very suitable for you as well!

What's in it for you

GKN-Fokker Landing Gear demonstrates passion for innovation and the employees are rightly proud for what they engineer and build. This is a truly challenging work environment: a role where you contribute as an individual but also as a member of a diverse and international team of experts. At GKN-Fokker Landing Gear, they not only provide you with the tools to perform at the best of your capabilities, but they also support and promote your technical and personal development.

Furthermore, they offer you:

• A gross monthly salary up to € 5500,- based on the CLA Metalektro and in line with your experience and qualifications
• At least one year contract via WFS PRO (including possible extension after the first year)
• 8% holiday allowance.
• 25 paid holidays for full-time employment,
• Working conditions according to the CAO Metalektro, including an excellent pension scheme (PME) and travel allowance,
• A pleasant and informal working environment, in which we work together to achieve the best result for our customers in a pleasant atmosphere.

Next to a competitive package, they will offer you a world of opportunities: they want to see your career fly! They will support your career progression by providing you with learning and development opportunities. That's the beauty of being part of a global business, once you're on board you never know where you career journey may take you!

Interesse?

WFS PRO is managing the recruitment process for this role. Apply now and join GKN-Fokker Landing Gear! The application process is carried out by WFS PRO. If you have questions, please contact Niels Kloostra at n.kloostra@wfspro.nl

Over de vacature

Are you the CNC specialist with a 5-axis turning and milling background that will provide assistance to the Manufacturing Engineering Team and solves problems with a smile?

Please reach out, and become our next CNC Programmer - CAM Engineer at GKN-Fokker Landing Gear!

Over het bedrijf

Fokker Landing Gear, part of GKN Fokker, is a recognized specialist in landing gear and related systems. They focus on the design and development, production and assembly of complete landing gears, as well as the repair and reassembly of systems already in use. In doing so, they work on the most famous aircraft and helicopters; think of the Apache combat helicopter, the F-35 Lightning II (JSF), the Bombardier Dash 8 Q400 and the multipurpose NH90 maritime combat helicopter.

Over de functie

As a skilled and experienced CNC Programmer CAM Engineer you will be responsible for creating NC programs for multi-axis milling and mill-turn machines, as well as providing essential shop floor support to CNC machine operators. This role is critical in ensuring the efficient and precise manufacturing of landing gear parts, and you will play a key role in solving machining problems as they arise.

What you'll do

• Develop / optimize NC programs for multi-axis milling and mill-turn machines using advanced CAM software.
• Provide hands-on shop floor support to CNC operators, ensuring smooth and efficient operations.
• Troubleshoot and resolve machining issues on the shop floor to maintain production quality and efficiency.
• Work closely with other departments to ensure that machining processes meet the required specifications and standards.
• Continuously improve machining processes and contribute to the development of best practices within the department.
• Utilize root cause analysis, preventative and corrective action to reduce / eliminate non-conformances.
• Develop / improve standard operation procedures (SOP).

Wie ben jij?

• Bachelor's in engineering (e.g. Engineering, Manufacturing Technology).
• 5 Years' experience in a hard metal manufacturing and a passion for precision, multi-axis machining.
• Proficient in using CATIA V5. Experience with TopSolid, Siemens NX CAM, Vericut, CrashGuard, Tooltech and TDM is an advantage.
• Strong ability to read and interpret Siemens NC code and Heidenhain.
• Extensive experience with on-machine probing.
• Experience and knowledge with hard metals;
• Proven experience with deep-hole drilling, mill-turning and turning techniques.
• Solid background in operating and programming CNC machines, with a deep understanding of multi-axis milling and mill-turn operations. Problem-solving skills and the ability to work effectively in a fast-paced manufacturing environment.
• Good understanding of GD&T.
• Willingness to work flexible hours to support production activities.
• Excellent communication and teamwork skills to collaborate effectively with CNC operators and other team members.
• Are you a contractor? This opportunity could be very suitable for you as well!

What's in it for you

GKN-Fokker Landing Gear demonstrates passion for innovation and the employees are rightly proud for what they engineer and build. This is a truly challenging work environment: a role where you contribute as an individual but also as a member of a diverse and international team of experts. At GKN-Fokker Landing Gear, they not only provide you with the tools to perform at the best of your capabilities, but they also support and promote your technical and personal development.

Furthermore, they offer you:

• A gross monthly salary up to € 5500,- based on the CLA Metalektro and in line with your experience and qualifications
• At least one year contract via WFS PRO (including possible extension after the first year)
• 8% holiday allowance.
• 25 paid holidays for full-time employment,
• Working conditions according to the CAO Metalektro, including an excellent pension scheme (PME) and travel allowance,
• A pleasant and informal working environment, in which we work together to achieve the best result for our customers in a pleasant atmosphere.

Next to a competitive package, they will offer you a world of opportunities: they want to see your career fly! They will support your career progression by providing you with learning and development opportunities. That's the beauty of being part of a global business, once you're on board you never know where you career journey may take you!

Interesse?

WFS PRO is managing the recruitment process for this role. Apply now and join GKN-Fokker Landing Gear! The application process is carried out by WFS PRO. If you have questions, please contact Niels Kloostra at

Over de vacature

Through Staffice, you will join our partner's logistics team in Hoofddorp as an essential link in their warehouse operations. Work starts at 08:30, taking the aerial lift up into the tall aisles to pick inventory accurately according to digital orders. When needed, you step onto the reach truck to move heavy pallets and clear primary routes. At 17:30, your working day concludes with an organized dock and properly handled products.

Tasks

• Pick warehouse inventory at high elevations using a lifting platform
• Operate reach trucks for stock transfers, loading, and staging
• Scan inventory tags to confirm correct batch numbers and counts
• Seal and pack parcels ready for carrier shipping
• Spot and report broken seals, damaged boxes, or stock discrepancies
• Move consolidated pallets to shipping bays
• Keep paths clear of packaging waste, pallets, and potential hazards
• Comply with warehouse safety measures and team instructions

What we are looking for

• Clear communication skills in English
• Available to work full-time, Monday through Friday from 08:30 to 17:30
• Ability to work comfortably at considerable heights
• Hands-on reach truck driving experience
• Systematic approach with an eye for product protection and safety

What we offer

• Wage of €15.06 per hour
• Travel allowance
• 29 paid holiday days per year
• 8% holiday allowance
• Flexible weekly or four-weekly payment arrangements
• Direct line of contact with your dedicated Staffice agent
• A pleasant working atmosphere is guaranteed.

Why Staffice?

• Sincere, fair, and reliable employer relations
• Straightforward communication without empty promises
• Dependable salary administration every pay cycle
• Support to help you grow your professional skill set

This vacancy in Hoofddorp is also interesting if you live in Haarlem, Aalsmeer, or Zaandam. We look at your skills and help you obtain certificates if needed. Are you still enthusiastic about this vacancy in logistics? Apply now and we will get in touch with you shortly. Do you have any questions? Feel free to call us at 085-0600565.

Over de vacature

Ben jij gek op techniek en droom jij van een carrière in de hightech elektronica? 🚀 Als operator SMD bij Benchmark in Almelo leer je direct op de werkvloer én groei je via een intern leertraject door naar senior SMD operator of Line Technician! Je start meteen met een fijne urengarantie van 40 uur per week en een salaris van € 22,36 per uur. Geen jarenlange ervaring als operator op zak? Helemaal geen probleem: met jouw technische inzicht, leergierigheid en motivatie word jij door ervaren collega's intern opgeleid! Klinkt als jouw ideale match, toch?! Solliciteer direct en pak deze kans! ✨

Wat bieden wij jou

• Een top salaris vanaf € 22,36 per uur!
• Fulltime aan de slag in 3 ploegen met urengarantie
• Interne opleiding tot Senior SMD-operator
• Ontwikkel jezelf bij Benchmark academy!
• Een high-tech werkomgeving. Super!
• Borrels met de leukste collega's!

Wie ben jij

Om de hightech SMD-lijnen soepel te laten draaien, is het belangrijk dat je als operator SMD aan de volgende eisen voldoet:

• Je beheerst de Nederlandse taal goed in woord en geschrif;
• Je hebt een technische achtergrond of aantoonbaar technisch inzicht (affiniteit met solderen, elektronica of sleutelen is een pré);
• Je bent fulltime beschikbaar voor de 3-ploegendienst;
• Je beschikt over eigen vervoer om naar de productielocatie in Almelo te komen;

Wat ga je doen

Als operator SMD bij Benchmark in Almelo vervul jij een cruciale rol op de hypermoderne PCBA-afdeling (Printed Circuit Board Assembly) 🖥️. Zonder jouw inzet en verantwoordelijkheidsgevoel kunnen je collega's immers niet verder! De geavanceerde SMD-lijn (Surface Mounted Device) wordt jouw vaste werkterrein. Hier worden microscopisch kleine componenten volautomatisch op complexe printplaten geplaatst en gesoldeerd voor toonaangevende wereldwijde opdrachtgevers. Ben je nog niet bekend met SMD? Geen probleem: met jouw interesse in techniek en elektronica ga je dit hier razendsnel leren!

Je start bij de basis met het picken van de juiste elektronische componenten en het zorgvuldig opbouwen van de productielijnen. Zodra je dat onder de knie hebt, neem je het hele proces van begin tot eind in handen: je leert de machines bedienen en instellen met behulp van computersystemen, voert onderhoud uit en spoort storingen digitaal op om ze vakkundig op te lossen. Zo doe je stap voor stap alle vakkennis op om zelfstandig de lijn te runnen en door te groeien tot senior specialist! 🛠️

Je werkt hier fulltime van maandag tot en met vrijdag in een vast 3-ploegenrooster (06:00 tot 14:15, 14:00 tot 22:15 en 22:00 tot 06:15 uur), waarbij de nachtdienst start op zondagavond. Met jouw enthousiasme zorg je er samen met je team voor dat de productie op topsnelheid blijft

Waar ga je werken

Stap binnen in de fascinerende wereld van Benchmark Electronics in Almelo! ⚡ Hier werk je mee aan geavanceerde spitstechnologie voor internationale topopdrachtgevers: van innovatieve communicatiesystemen voor vliegtuigen tot levensreddende medische meetinstrumenten. Met maar liefst 24 vestigingen over de hele wereld is Benchmark dé ultieme hotspot als jij passie hebt voor techniek en elektronica. Wil jij je kennis naar een hoger niveau tillen? Dankzij de Benchmark Academy liggen er volop opleidingskansen klaar om jouw vakkennis continu uit te breiden. En het mooiste van alles: als operator sta je er nooit alleen voor. Je kunt rekenen op de beste persoonlijke begeleiding vanuit Tempo-Team, waar Celine en Ranya dagelijks voor je klaarstaan om je te coachen. Helemaal top geregeld, toch?! 🚀 #baanrader

Sollicitatie

Zie jij jezelf al ontwikkelen tot dé senior operator SMD bij Benchmark? BAM! Solliciteer dan snel en zet vandaag de eerste stap naar jouw hightech toekomst! 🚀 Let op: we nemen contact met je op via telefoon of e-mail. Heanig an!

Over de vacature

Gas erop en gaan met die banaan! Als Line Operator bij dit bruisende logistieke bedrijf in de regio van de groente en fruit zorg jij dat de hele operatie gesmeerd loopt. Je werkt heerlijk in de dagdienst, waardoor je avonden altijd vrij zijn, en dat ook nog eens in een supergezellig team waar werkplezier op nummer één staat. Als Line Operator krijg je bovendien volop trainingen aangeboden, zodat jij je als een vis in het water voelt in deze dynamische omgeving!

Wat bieden wij jou

• Salaris tussen de € 17,- en € 20,- per uur!
• Veiligheid staat hier altijd op de eerste plek!
• Volop trainingen voor jouw persoonlijke groei!
• Gezellige collega's en een informele werksfeer!
• Na 3 maanden een vaste aanstelling!
• Werken in de dagdienst: je avonden zijn vrij!

Wie ben jij
Jij bent een echte aanpakker die niet bang is om de leiding te nemen en zorgt dat elke Line Operator taak tot in de puntjes wordt uitgevoerd. Ook ben je een echte leider en heb je geen probleem met mensen aanspreken. Je bent hiernaast thuis in een gekoelde omgeving! Dit is natuurlijk nodig om alle groente en fruit lekker vers te houden!

• Je spreekt Engels
• Je beschikt over een geldig heftruckcertificaat
• Je bent bestand tegen een koelere werkomgeving
• Je bent bereid om in Breda te werken
• Je bent bereid om 2 zaterdagen per maand te werken

Wat ga je doen
Jouw dag als Line Operator begint vol energie! Je stapt de werkvloer op, begroet je team en checkt direct of de productielijn klaar is voor de start. 🏎️ Je bent de spil in het web: je stuurt je collega's aan, springt op de heftruck om pallets te verplaatsen en lost kleine storingen aan de lijn razendsnel op. Omdat we met verse groente en fruit werken, is het tempo hoog, maar de sfeer is altijd top! Jij bent ben jij dé motor van de afdeling. Je zorgt dat alle producten veilig en op tijd klaarstaan voor transport, terwijl je ondertussen je team motiveert met jouw enthousiasme. 🍎

• Bedienen en controleren van de productielijn
• Aansturen en motiveren van je collega's
• Rijden op de heftruck voor interne logistiek
• Bewaken van de kwaliteit en veiligheid
• Administratieve afhandeling van de orders

Waar ga je werken
Je komt terecht bij een moderne logistieke topper die gespecialiseerd is in de opslag van groente en fruit. Hoewel de omgeving gekoeld is om de producten vers te houden, merk je daar door je actieve rol als Line Operator helemaal niets van! De werksfeer is warm, open en er is altijd ruimte voor een grapje op de werkvloer. We investeren graag in jou met gerichte trainingen, want we willen dat jij veilig en met een glimlach je werk doet. 🤝

Sollicitatie
Word jij hier nu enthousiast van en zie jij jezelf al aan de slag als Warehouse Operator? Laat het dan snel weten! Solliciteer via onderstaande Button, stuur je CV naar daan.bierbooms@tempo-team.nl of wouter.van.der.peijl@tempo-team.nl of bel naar 076-5330604. #Mkb

Over de vacature

Yesss! 🍪 Cookies, an awesome salary and lots of growing opportunities?! That’s possible as a production worker at Merba in Oosterhout! Get a salary of €16,37 per hour. And earn up to €24,55 with shift allowances! 🤑 Sounds like the milk to your cookie? Apply now!

What we offer

• Great salary of €16,37 per hour!
• Get up to €24,55 p/h for working in shifts!
• Lots of opportunities to grow further 🚀
• Merba gets a 8+ rating from their employees!
• Travel allowances from 10 kilometers!
• Work with the most delicious cookies all day! 🍪🤤

Who you are

To be a successful production worker at Merba, it’s important that you meet the following requirements:

• You can work in 3 shifts;
• You're available Monday to Friday;
• You speak Dutch or English;
• You can work in Oosterhout;
• You have your own transportation;
• You can take off/out all your jewelry or piercings if you have them;
• You're okay with being scheduled in reserved shifts.

What will you do

Get ready to work at cookie paradise! 🍪 As a production worker at Merba, you start at the packing department. Together with your team, you fix that every cookie is perfectly packed! From chocolate cookies to cranberry ones. They all pass by on the production line! Smells good, right? Make sure to taste a few of them! 😋

At Merba there’s always room to grow. Start the work and show what you’ve got! Once you’ve mastered the production work, you can grow into roles like line operator, machine operator or reachtruck driver. Hard work pays off here! 🔥

You'll work in 3 shifts: 6:00-14:00 hr, 14:00-22:00 hr, 22:00-06:00 hr. 🕒
At Merba they work with reserve shifts. If you are available 5 days a week, you'll get 2 reserve shifts and 3 guaranteed days of work.

Where will you work

You’ll work as a production worker at Merba in Oosterhout (NB). A cookie factory that smells like heaven! 🤩 Merba bakes and packs millions of cookies every day. Maybe you’ve spotted them in the supermarket already. 🕵️ You get to be part of the team that makes them!

At Merba you work with friendly colleagues. With a warm and positive vibe! There’s a great canteen where you have your lunch, dinner or late night snacks. Everyone sits together to make sure every break is fun too!🚀 And on top of that, Merba is a #baanrader. That means Merba is highly recommended as a place to work!

Job application

Ready to work as a production worker? Apply now and we’ll contact you within one workday already! Get your first salary next week. Let’s gooo! 💸

Good to know: within 15 minutes after your application, you will receive a Whatsapp message from us. We will ask you a few short questions about your application to help you faster. Don't have WhatsApp? Then we will call or email you! 📞

Over de vacature

As a production worker at Plukon in Blokker, you earn €15.13 per hour, get a 12.5% shift allowance, and receive a 15% discount on fresh chicken! Are you looking for a fine job for 24 to 40 hours per week in 2 shifts? At Plukon, you work on the fresh line with quality poultry products. With a chance of a permanent contract, free canteen vouchers on your first workday, and training options, this is a great match. Read on and apply as a production worker!

Apply now and receive a WhatsApp message within 15 minutes with a few short questions so we can help you quickly. Don't have WhatsApp? Then we will contact you by phone or email!

what we offer

• Gross salary of €15.13 per hour
• 15% discount on fresh poultry products
• 12.5% shift allowance on top of your wage
• Free canteen vouchers on your first workday
• Travel allowance of €0.23 per kilometer
• Chance of a permanent contract and growth

who are you
To keep the processing line running well, it is important that you as a production worker meet the following requirements:

• You are 18 years of age or older
• You are available between 24 and 40 hours per week
• You speak Dutch or English
• You are available to work in 2 shifts
• You can work between 07:30-16:30 and 16:30-01:30
• You are willing to work in Blokker
• You have your own transport
• You are willing to work at 4 degrees Celsius

what will you do
As a production worker on the cold side, you help process and pack fresh chicken products. You do not work in slaughtering; your focus is on packing, weighing, and labeling products. You work in a fresh environment of 4 degrees. Have you worked at Plukon before? Please inform us right away when you apply!

Your daily tasks as a production worker:

• Packing, weighing, and labeling fresh chicken items
• Checking product quality on the packing line
• Keeping your workstation clean and tidy

where will you work
Plukon in Blokker is a large company in the food industry. You will join a friendly team in a positive work environment. Your dedication counts: you receive canteen vouchers on your first workday and can earn a free forklift certificate through Randstad. Growth into an operator role is also possible.

• Friendly team on the fresh processing line
• Earn a forklift certificate free of charge
• Chance of a permanent contract with good results

job application
Are you ready to start as a production worker at Plukon? Apply directly!

Good to know: within 15 minutes after your application, you will receive a WhatsApp message from us. We will ask you a few short questions about your application to help you faster. Don't have WhatsApp? No problem! Then we will contact you by phone or email.